Cisco WAP371  product


Cisco WAP371-E-K9

Cisco WAP371 Wireless-AC/N Dual Radio Access Point with Single Point Setup (Europe)

High-Performance, Easy-to-Deploy, and Highly Secure Business-Class Wireless-AC Connectivity.

● Provides cost-effective 802.11ac connectivity up to three times the 802.11n speed
● Supports 3x3 multiple-input multiple-output (MIMO) technology with three spatial streams for maximum performance
● Gigabit Ethernet LAN interface with Power over Ethernet (PoE) facilitates flexible installation
● Captive portal helps enable highly secure guest access with customized roles and rights
● Single Point Setup requires no controller, for easy cost-effective deployment of multiple access points
● Works right out of the box with easy installation and simple web-based configuration and wizard

Product Overview
In today’s dynamic business environment, employees are becoming more mobile and collaborative than ever. To stay productive, they need dependable, business-class access to network applications throughout the office. The Cisco WAP371 Wireless-AC/N Dual Radio Access Points provide a simple, cost-effective way to extend highly secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.

The Cisco WAP371 Wireless-AC/N Dual Radio Access Points use concurrent dual-band radios for improved coverage and user capacity. The 3x3 multiple-input multiple-output (MIMO) technology with three spatial streams allows the access point to run at maximum performance. Gigabit Ethernet LAN interfaces with PoE facilitates flexible installation and reduces cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice over IP (VoIP) and video applications.

To provide highly secure guest access to visitors and other users, the Cisco WAP371 Wireless-AC/N Dual Radio Access Points support a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome message and access details, and reinforces your brand with company logos.

The Cisco WAP371 Wireless-AC/N Dual Radio Access Points are easy to set up and use, with intuitive wizard-based configuration to get you up and running in minutes. An attractive design with flexible mounting options allows the access points to smoothly blend into any small-business environment.

To enhance reliability and safeguard sensitive business information, the Cisco WAP371 Wireless-AC/N Dual Radio Access Points support both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorized users out.

Designed to scale smoothly as your organization grows, the access points feature controller-less Single Point Setup that simplifies the deployment of multiple access points without additional hardware. With Cisco WAP371 Wireless-AC/N Dual Radio Access Points, you can extend business-class wireless networking to employees and guests anywhere in the office, with the flexibility to meet new business needs for years to come.

● Concurrent dual-band radio support up to 900 Mbps to maximize capacity and coverage.
● 3x3 multiple-input multiple-output (MIMO) with three spatial streams allows maximum performance.
● Single Point Setup, a controller-less technology, simplifies the deployment and management of multiple access points - without requiring additional hardware.
● The Gigabit Ethernet LAN interface enables a high-speed uplink to the wired network.
● Robust security, including WPA2, 802.1X with RADIUS secure authentication, and rogue access point detection, help protect sensitive business information.
● Captive portal support facilitates highly secure, customized guest access with multiple rights and roles.
● Simple installation and intuitive web-based configuration and wizard facilitate fast, simple deployment and setup in minutes.
● Support for PoE allows for easy installation without expensive additional wiring.
● Sleek design with multiple internal antennas and versatile mounting kit allows for installation on a ceiling, wall, or desktop.
● Intelligent QoS prioritizes network traffic to help keep critical network applications running at top performance.
● Power-saving sleep mode and port control features help maximize energy efficiency.
● Workgroup Bridge mode lets you expand your network by wirelessly connecting to a second Ethernet network.
● Support for IPv6 lets you deploy future networking applications and operating systems without costly upgrades.

Specifications at a Glance:

Interfaces: 10/100/1000 BASE-T autosensing (RJ45)

Powering Options: 802.3at/af Ethernet switch, Cisco SB-PWR-INJ2-xx power injector or local power supply.

Frequency: Concurrent band 2.4 GHz and 5 GHz

Wireless: 802.11ac, 3x3 multiple-input multiple-output (MIMO) with 3 spatial streams at 5 GHz.
802.11n 2x2 multiple-input multiple-output (MIMO) with 2 spatial streams at 2.4 GHz.

Operating modes: Access point mode, Wireless Domain Services bridging, client bridge mode.

IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)

LAN Gigabit Ethernet autosensing
Cabling type
Category 5e or better

Internal antennas optimized for installation on a wall or ceiling
LED indicators
Power, WLAN, LAN

Operating system

Physical Interfaces
10/100/1000 Ethernet, with support for 802.3af/at PoE, power port for AC adapter (not included)
Reset button
Lock slot
Slot for Kensington lock
Power, Wireless, Ethernet

Physical Specifications
Physical dimensions (W x D x H)
9.05 x 9.05 x 1.69 in. (230 x 230 x 43 mm)
1.81 lb or 740 g

Network Capabilities
VLAN support
Number of VLANs
1 management VLAN plus 16 VLANs for SSIDs
802.1X supplicant
SSID-to-VLAN mapping
Auto channel selection
Spanning tree
Load balancing
● IPv6 host support
● IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

Yes, including Enterprise authentication
Access control
Yes, management access control list (ACL) plus MAC ACL
Secure management
SSID broadcast
Rogue access point detection

Mounting and Physical Security
Multiple mounting options
Mounting bracket included for easy ceiling or wall mounting
Physical security lock
Kensington lock slot
Quality of Service
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS

Wireless throughput
Up to 950-Mbps data rate (real-world throughput will vary)
Recommended user support
Up to 64 connective users, 30 active users per radio
Multiple-Access Point Management
Single Point Setup
Number of access points per cluster
Active clients per cluster

Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)

Management protocols
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
Event logging
Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)
DHCP client
IPv6 host
HTTP redirect

Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type
Dual radio, orthogonal frequency division multiplexing (OFDM)
3x3 multiple-input multiple-output (MIMO) with 3 spatial streams at 5 GHz
2x2 MIMO with 2 spatial streams at 2.4 GHz
20-, 40-, and 80-MHz channels for 802.11ac
20- and 40-MHz for 802.11n
PHY data rate up to 1.6 Gbps
802.11 dynamic frequency selection (DFS)

Data rates supported
● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
● 802.11n: 6.5 to 450 Mbps
◦ 20-MHz bandwidth: MCS 0-15 for supported data rates
◦ 40-MHz bandwidth: MCS 0-15 for supported data rates
● 802.11ac: 6.5 to 1300 Mbps
◦ 20-MHz bandwidth: MCS 0-9 for supported data rates
◦ 40-MHz bandwidth: MCS 0-9 for supported data rates
◦ 80-MHz bandwidth: MCS 0-9 for supported data rates

Wireless isolation
Wireless isolation between clients

Internal antennas
Internal fixed PIFA antenna
Antenna gain in dBi
2 dBi each antenna

Receiver sensitivity
2.4 GHz
● 802.11b: -86 dBm @ 11 Mbps
● 802.11g: -75 dBm @ 54 Mbps
● 802.11n(HT20): -69 dBm @ MCS15
● 802.11n(HT40): -66 dBm @ MCS15
5 GHz
● 802.11a: -79 dBm @ 54 Mbps
● 802.11ac(HT20): -62 dBm @ MCS9
● 802.11ac(HT40): -59 dBm @ MCS9
● 802.11ac(HT80): -57 dBm @ MCS9

Wireless distribution system (WDS)
Fast roaming
Multiple SSIDs
Wireless VLAN map
WLAN security
Wi-Fi Multimedia (WMM)
Yes, with unscheduled automatic power save

Operating Modes
Access point
Access Point mode, WDS Bridging, Workgroup Bridge mode

Power options
IEEE 802.3at Ethernet switch
Cisco power injector: SB-PWR-INJ2-xx
AC adapter: SB-PWR-12V2A-xx
Peak power: 17W

● UL 60950-1
● CAN/CSA-C22.2 No. 60950-1
● IEC 60950-1
● EN 60950-1
Radio approvals:
● FCC Part 15.247, 15.407
● RSS-210 (Canada)
● EN 300.328, EN 301.893 (Europe)
● AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
● FCC Part 15.107 and 15.109
● ICES-003 (Canada)
● EN 301.489-1 and -17 (Europe)
Operating temperature
0° to 40°C (32° to 104°F)
Storage temperature
–20° to 70°C (–4° to 158°F)
Operating humidity
10% to 85% noncondensing
Storage humidity
5% to 90% noncondensing
System memory
256 MB RAM
128 MB flash

Minimum Requirements
● Switch/router with PoE support, PoE injector, or AC power adapter
● Web-based configuration: Java-enabled web browser

Виж още Аксеспойнт/Репитер Безжични Cisco

Технически характеристики

Тип:  Аксес пойнт
Монтаж:  За външен/вътрешен монтаж
Безжична скорост:  900 Mbps
Wi-Fi Стандарт:  ac, n, g, b, a
Честота:  2.4 & 5 GHz
Антени:  3 Вътрешни
dBi на антена/и:  2
PoE:  In
Интерфейс:  1x 1000
Други:  Няма

Вземи на изплащане

Свързани продукти и тагове: