Суич Planet FGSD-1011HP, 8x 10/100Mbps Base-T PoE Ports MDI/MDI-X RJ45, 1x SFP 100/1000BASE-X, 1x 10/100/1000BASE-T Gigabit port

Centralized Power Distribution for HD IP Surveillance System

The FGSD-1011HP, a new member of the PLANET 802.3at PoE Fast Ethernet Switch family, provides 8-port 10/100Mbps 802.3af/at Power over Ethernet, 1 Gigabit port and 1 Gigabit SFP port with a total of 120 watts of PoE budget. Its power budget is more than enough for any network applications with Fast Ethernet speed transmission. The eight 802.3af/at PoE ports feature PoE power injector function which is able to drive 8 IEEE 802.3at compliant powered devices. The FGSD-1011HP also offers a simple, cost-effective and non-blocking wire-speed performance. It comes with a 9-inch compact metal housing, suitable for desktop deployment in SOHO office or department network application.


Distance Extended for Transmission of Power and Data

The built-in solid DIP switch provides "Standard", "VLAN" and "Extend" operation modes. The FGSD-1011HP operates as a normal IEEE 802.3af/at PoE Switch in the "Standard" operation mode. The "VLAN" operation mode features port-based VLAN function that can help to prevent the IP camera’s multicast or broadcast storm from influencing each other.

In the "Extend" operation mode, the FGSD-1011HP operates on a per-port basis at 10Mbps duplex operation but can support 30-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature, the FGSD-1011HP provides an additional solution for 802.3af/at PoE distance extension, thus saving the cost of Ethernet cable installation. Its VLAN isolation function isolates each port so as to prevent broadcast storm and defend DHCP spoofing in the “Extend” operation mode.


Two Gigabit Uplink Ports

The FGSD-1011HP comes with two uplink ports with 1000Mbps transfer rate to ensure high-speed data and video transmission, reliable assurance for connection between the surveillance system and outside network where the eight PoE+ ports can be used to their full potential.



Fiber-Optic Link Capability Enables Extension of Network Deployment

The mini-GBIC slot built in the FGSD-1011HP supports SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, meaning the administrator now can flexibly choose the suitable SFP transceiver based on the transmission distance or the transmission speed required to extend the network efficiently. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications to uplink to backbone switch and monitoring center in long distance.



Hardware Specifications:

10/100Mbps Ports 8 10/100BASE-TX MDI/MDI-X RJ45 ports
Gigabit Ports 1 10/100/1000BASE-T MDI/MDI-X RJ45 port
SFP Slot 1 100/1000BASE-X SFP/mini-GBIC interface
PoE Inject Port 8-port with 802.3af/at PoE injector function (Ports 1 to 8)
LED Display

System:

Power (Green)
10/100BASE-TX RJ45 Interface:
PoE (Orange, Ports 1 to 8)
LNK/ACT (Green, Ports 1 to 8)

10/100/1000BASE-T RJ45 Interface:
1000Mbps LNK/ACT (Green, Port 9)

100/1000BASE-X SFP Interface:
1000Mbps LNK/ACT (Green, Port 10)

DIP Switch 100m distance in standard mode
250m distance in extend mode (based on the cable category)
Switch Architecture Store and Forward switch architecture
MAC Address Table 4K MAC address table with auto learning function
Switch Fabric 5.6Gbps
Switch Throughput 4.16Mpps @64bytes
Maximum Packet Size 9K bytes
Flow Control Back pressure for half duplex; IEEE 802.3x pause frame for full duplex
Power Requirements AC 100~240V, 2.5A max.
Power Consumption 135 watts, 463.2 BTU
Dimensions (W x D x H) 220 x 150 x 44 mm
Weight 1220g
ESD Protection Contact discharge of ±6KV DC
Air discharge of ±8KV DC
Surge Immunity ±4KV

Power over Ethernet

PoE Standard IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span
Power Pin Assignment 1/2 (+), 3/6 (-)
PoE Power Output Per Port 52V DC, 600mA. max. 30 watts (IEEE 802.3at)
Per Port 52V DC, 300mA. max. 15.4 watts (IEEE 802.3af)
PoE Power Budget 120 watts
Number of PDs, 7 watts 8
Number of PDs, 15.4 watts 8
Number of PDs, 30 watts 4

Standard Conformance

EMI Safety CE, FCC
Standard Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus



Виж още Суич Planet
Виж всички Суич в категорията