Захранване 200W, Fortron FSP200-50SNV, Passive PFC, mATX

Fortron FSP200-50SNV

Specifications

Input Specifications
• Voltage:
115/230 VAC
• Frequency: 47Hz - 63Hz
• Input current: 4.0 amps maximum / 230 Vrms, 50Hz.

Output Specifications
• Over-voltage protection: +5V: 6.5V (maximum);
+3.3V: 4.6V (maximum);
+12V:15.5V (maximum)
• Over-current protection: +3.3V:48A maximum;
+5V:42A maximum;
+12V:19A maximum
• Remote ON/OFF control: The power supply shall accept a logic collector level which
will disable / enable all output voltage (excluding +5V standby).
• Power good signal: 230V (full load): 100 - 500 ms

General Specifications
• Efficiency: 65% min.
• Hold-up time: 10 ms minimum: at 230V / 50 Hz (full load).

Environmental Specifications
• Operating conditions:
ambient temperature 0°C~50°C
• Storage and
shipping conditions: ambient temperature -20°C~+65°C
• Dielectric withstand: input / output 1800 VAC for 1 second,
input to frame ground 1800VAC for 1 second

Output

Output Voltage Min. load Max. load Load Reg. Ripple & Noise
+5Vsb 0.1A 2.0A ±5% 50mV P-P
-12V 0.0A 0.5A ±10% 120mV P-P
+12V 2.0A 10.0A ±5% 120mV P-P
+5V 1.0A 16/12.6A ±5% 50mV P-P
+3.3V 0.5A 11.5/16.7A ±5% 50mV P-P

+3.3V & +5V total output not exeed 118W
+3.3V & +5V & +12V total output not exeed 182.5W

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.

Виж още Захранвания Настолни компютри
Виж всички Захранвания Настолни компютри в категорията