Кутия NZXT H6 RGB+, ATX/Micro-ATX/Mini-ITX, 1x USB 3.2 Gen 2x2 Type-C с прозорец, 2x 360mm RGB + 1x 120mm RGB вентилатора, бяла, без захранване

The H6 is a compact mid-tower PC case built for builders who want a seamless blend of performance and design. Its dual-chamber layout, redesigned high-airflow mesh, and angled front-right fans deliver targeted, powerful cooling, while one piece of tempered glass — bent to a tight radius for minimal distortion — puts your build on full display. Support for up to 10 x 120 mm fans, radiators up to 360 mm, a built-in GPU anti-sag bracket, and back-connect motherboard compatibility make the H6 fully equipped for modern, high-performance builds. Available as the H6 (no fans included) or the H6 RGB+ (pre-installed F360 RGB Reverse intake fans, F120 RGB exhaust, and Control Hub Lite).

• Compact 55 L dual-chamber ATX mid-tower
• One-piece curved tempered glass — tight bend radius, minimal distortion
• High-airflow mesh across top, front-right, and right panels
• Support for up to 10 x 120 mm fans
• Radiator support up to 360 mm at the top
• Built-in GPU anti-sag bracket
• Back-connect motherboard compatibility (BTF, Project Zero, Project Stealth)
• Tool-less side panels and smart cable routing
• H6 RGB+ ships with pre-installed RGB fans and Control Hub Lite

Dual-Chamber Design A dedicated secondary chamber isolates power and cabling, while angled front-right fans deliver targeted airflow to your hottest components.
Seamless Curved Glass One-piece tempered glass bent to a tight radius for minimal distortion — every component front and center.

Tech Specs

               General                                                                

Enclosure Type

Dual-chamber ATX case

Motherboard Support

ATX, Micro-ATX, Mini-ITX

Back-Connect Motherboard Support

Yes (ATX)

Power Supply Type

ATX

Materials

Steel, tempered glass

               Dimensions                                                                

Dimensions (H x W x D)

448 x 292 x 420 mm (17.6 x 11.5 x 16.5 in)

Volume

55 L

Weight

9.3 kg (20.5 lb)

               Clearance                                                                

CPU Cooler Height

Up to 165 mm (6.5 in)

GPU Length

Up to 390 mm (with 30 mm front-right fan)

PSU Length

Up to 200 mm (7.9 in)

Cable Routing Space

Up to 90 mm (3.5 in)

Front-Right Fan Thickness

Up to 30 mm (without limiting GPU length)

Top Radiator + Fan Thickness

Up to 67 mm (2.6 in)

               Front I/O                                                                

USB 3.2 Type-A

2

USB 3.2 Gen 2x2 Type-C

1

Headset Jack

1

               Expansion & Drives                                                                

Expansion Slots

7

2.5" Drive Bays

2

3.5" Drive Bays

1

               Cooling Support                                                                

Front-Right Fans

3 x 120 mm

Top Fans

3 x 120 mm

Bottom Fans

3 x 120 mm

Rear Fan

1 x 120 mm

Top Radiator

Up to 360 mm (Up to 400 mm)

Rear Radiator

Up to 120 mm

               Included Fan Specs                                                                

Model

F360 RGB Reverse / F120 RGB

Quantity

2 / 1

Speed

2,200 ± 220 RPM / 2,400 ± 240 RPM

Airflow

62.14 CFM / 70.67 CFM

Static Pressure

2.7 mmH₂O / 3.7 mmH₂O

Noise Level

34.39 dBA / 33.05 dBA

Fan Connector

8-pin (4-pin PWM and NZXT RGB combo) / 4-pin

               Control Hub                                                                

Fan Channels

2 x NZXT 8-pin (PWM only) / 1 x 4-pin PWM (DC+PWM control)

RGB Channels

2 x NZXT 8-pin / 1 x NZXT RGB

Max LED Support

Each NZXT 8-pin channel supports a maximum of 96 LEDs. NZXT RGB channel supports up to 40 LEDs and up to 5 NZXT devices.

System Requirements

USB 2.0 Internal Header / SATA Power

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.