Суич Netgear GS110TP-200EUS, 1000Mbps, 8-Port

GS110TP-200EUS

NETGEAR’s ProSafe® family of Smart Switches with high performance and cost efficiency,
this 10-port Gigabit Smart Switch is packed with powerful features capable of enhancing any type
of business network. The GS110TP is designed for customers who need a low port density solution
with the combination of Gigabit speed and PoE capability. The GS110TP comes with 8 dedicated
10/100/1000 Mbps copper ports to connect to your end devices and two additional Gigabit Fiber
ports for uplinks with greater distance. With PoE capability on all 8 copper ports, the GS110TP can
automatically detect PoE on the end devices and dynamically manage power assignments and
priority. It is capable of delivering up to 15.4W of power to devices such as wireless access points,
IP phones and IP cameras, providing flexibility and ease of deployment to your network.
The GS110TP comes with a comprehensive set of features, such as enhanced VLAN and QoS,
access control lists (ACL), 802.1x port authentication, rate limiting and IGMP snooping and many
more, to provide businesses with networks that are geared for growth while ensuring performance
and reliability.

With the fanless design and compact form factor, the GS110TP offers quiet operation and is suit-
able for deployments in any type of environment, especially the ones which are sensitive to noise.
Like all NETGEAR ProSafe Smart Switches, the GS110TP is backed by the NETGEAR ProSafe
Lifetime Warranty†, and 1-Year ProSupport 24x7 Advanced Technical Support*.
PoE Power Management
GS110TP offers useful PoE power management features to help you better control and moni-
tor your power resource. The PoE timer can help turn off the PoE ports during certain times of
the day so that your network can be more secure as well as energy efficient. It can also set
prioritization on power usage so that specified ports are always guaranteed to get the power
first if total power required exceeds the total power budget. The power will be assigned to the
PoE ports dynamically depending on the actual power need of the individual network devices so
that you don’t need to do any calculation. The PoE LED on the front panel will light up if the PoE
usage is reaching the threshold, meaning that insufficient PoE resource is left for powering up
additional ports.

NETGEAR Green
• Up to 70% power savings compared to the non-Green version
• Auto power-down mode saves energy when port is not in use
• Cable length detection reduces power usage when network cable is shorter than 10 meters
Advanced Quality of Service (QoS)
Priority queuing ensures high-priority traffic gets delivered efficiently, even during congestion
from high-traffic bursts. Companies implementing network telephony or video conferencing, for
example, need to be able to prioritize such voice and video traffic and other real-time applications
over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic
ensures quality of latency-sensitive services and applications despite increasing traffic loads. The
GS110TP provides an extensive set of QoS features:
• 802.1p-based prioritization
• Layer 3-based prioritization
• Rate limiting
Advanced Security
The GS110TP provides more robust security. This includes:
• 802.1x for authentication
• ACL filtering to permit or deny traffic based on MAC or IP addresses

Usability Enhancements
The GS110TP is a powerful switch, yet very ease to manage. It comes with many usability enhance-
ments to help customers fully utilize the features for a more optimized and secure network. For
example, the Auto Voice VLAN and Auto Video features will assist customers to easily set up VoIP or
IP surveillance networks with a couple of simple steps. You don’t need to be an IT professional to set
up VoIP or IP surveillance. Security is critical for business networks. However, not everyone knows
how to set up a secure network. The ACL Wizards on the GS110TP will guide even naïve users
through the setup of access control and address filtering.
Centralized Management via the New Smart Control Center
With multiple switches in the network, managing configurations on each switch and upgrading
firmware becomes a big challenge. NETGEAR’s Smart Control Center that comes with the GS110TP
and many other Smart switch models can help make this task much easier and simpler. It can
perform discovery of the switches on your network, push configuration and firmware updates to
multiple selected switches at once, and can even schedule when the tasks should be performed.

Network Protocol and Standards Compatibility
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000BASE-X
IEEE 802.3x full-duplex flow control
IEEE 802.3af (DTE Power Via MDI)

Power Supply
Power consumption: 59.3W maximum
Network Ports
Eight (8) 10/100/1000 Mbps auto sensing + 2 Gigabit SFP uplinks

Performance Specifications

Forwarding modes: Store-and-forward
Bandwidth: 20 Gbps full duplex
Network latency: Less than 4 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
Buffer memory: 512 KB embedded memory per unit
Address database size: 4k media access control (MAC) addresses per system
Mean time between failure (MTBF): 157,004 hours (~18 years)
Acoustic noise: 0 dB

Environmental Specifications

Operating temperature: 32° to 122° F (0° to 50° C)
Storage temperature: -4° to 158° F (-20° to 70° C)
Operating humidity: 90% maximum relative humidity, non-condensing
Storage humidity: 95% maximum relative humidity, non-condensing
Operating altitude: 10,000 ft (3,000 m) maximum
Storage altitude: 10,000 ft (3,000 m) maximum

Status LEDs
Per RJ45 port:LInk/activity, speed, PoE status
Per SFP port: Link/speed
Per device: Power, PoE Max

Power Adapter
48v, 1.25A external power adapter, localized to country of sale

Administrative Switch Management

IEEE 802.1Q Static VLAN (64 groups, Static)
Protected Ports
IEEE 802.1p Class of Service (CoS)
Port-based QoS
DSCP-based QoS

DiffServ
IEEE802.3ad Link Aggregation (manual or LACP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Trees Protocol (RSTP)
IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
SNMP v1, v2c, v3
RFC 1213 MIB II
RFC 1643 Ethernet Interface MIB
RFC 1493 Bridge MIB
RMON group 1, 2, 3, 9
Auto Voice VLAN
DHCP Filtering
Auto denial-of-service (DoS) protection
HTTP and HTTPS
Ping and traceroute
Power saving when link down
RFC 2131 DHCP client
IEEE 802.1x with Guest VLAN
Jumbo frame support
Port-based security by locked MAC addresses
MAC and Ip-based ACL
Storm control for broadcast, multicast and unknown unicast packets
IGMP Snooping v1/v2
Port-based egress rate limiting
SNTP
Port Mirroring Support (Many to one)
Web-based configuration
Configuration Backup/Restore
Password Access Control
TACACS+ and RADIUS support
Syslog
Firmware upgradeable
PoE (46 watts of power budget)

Physical Specifications
Dimensions:(W x D x H) 236 x 101.6 x 27 mm (9.3 x 4.0 x 1.07 in)
Weight: 0.7 kg (1.55 lb)



Виж още Суич Netgear
Виж всички Суич в категорията