Кутия Kolink Observatory MX Mesh ARGB, ATX/Micro-ATX/Mini-ITX, 2x USB 3.0, с прозорец, бяла, без захранване

Kolink Observatory MX Mesh ARGB

 

House your gaming PC in something bold with the Kolink Observatory MX Series PC Case. The dual-tone colouring, half-hinged glass side panel, and front mesh create a strong aesthetic for any gaming PC. Meanwhile, the five pre-installed Kolink Umbra ARGB/PWM fans provide ample airflow to keep your components at optimum temperature.

Kolink Observatory MX Glass ARGB Mid-Tower PC Case at a Glance: 

• Mid-tower PC case with dual-tone design and half-hinged tempered glass panel 
• Mesh front panel and dedicated solid steel PSU shroud
• Support for ATX motherboards and GPUs up to 330mm long 
• Five pre-installed Kolink Umbra ARGB/PWM fans 
• Four storage drive bays
• Available in three colourways

 

The Kolink Observatory MX Mesh: Optimal Airflow

The Kolink Observatory MX Series features two styles, each available in three colourways. You can choose between the Glass or Mesh editions, and then black, white, or black and white colourings.

 

This is the Mesh model in black and white. The front panel has a mesh design, to ensure ample airflow. Keeping the aesthetic sleek, the dedicated PSU shroud is formed with solid steel panelling. As the black and white model, the exterior and interior are black, with the shroud offset in white. Thus, creating a bold effect.

 

Generous Hardware Support

More than just its good looks, the Kolink Observatory MX Mesh has incredible support for a variety of hardware. This chassis can accommodate a Mini-ITX, Micro-ATX, or ATX motherboard, with seven expansion slots on the rear panel for PCIe devices. In the main chamber, there is 330mm clearance for GPUs.

The dedicated PSU shroud can host power supplies up to 180mm. There is also a storage drive cage with four bays. Two can hold either 2.5" SSDs or 3.5" HDDs, whilst the other two are for 2.5" drives only.

 

Airflow for Days

To keep your gaming PC at optimum temperature, the Kolink Observatory MX Mesh can support both air and water-cooling hardware. There are five Kolink Umbra ARGB/PWM fans pre-installed across the chassis, to bolster the air flowing through the mesh panelling. The front features two 140mm fans. Upon the top, there are two 120mm models, and the rear holds a singular 120mm fan, too.

Alternatively, there is support for radiators and additional fans throughout the chassis. The front panel can host a maximum of two 140mm fans or a radiator either 240mm, 280mm, or 360mm long. For the back panel, the 120mm fan mount can instead support a 120mm radiator. The top panel can only support the two 120mm fans, but there are also two 120mm brackets on the PSU shroud to provided dedicated cooling for the second chamber.

Finally, the Kolink Observatory MX Mesh PC Case has clearance for CPU coolers up to 160mm tall.

 

Additional Features

The Kolink Observatory MX Mesh features a USB 3.0 and USB 2.0 port as part of the I/O panel, with an HD audio jack. There is also a reset button that can be used to control the fans. Alternatively, these can be connected via a 3-pin 5V header and controlled through the lead fan.

 

 

Technical details

• Dimensions: 200 x 440 x 350 mm (W x H x D)
• Material: Steel, Tempered Glass
• Weight: approx. 5.6 kg
• Colour: White
• Formfactor: ATX, Micro-ATX, Mini-ITX
• Fan Support:
  • Front: 2x 120 / 140 mm
  • Top: 2x 120 mm
  • Rear: 1x 120 mm
  • PSU Shroud: 2x 120 mm
• Pre-installed:
  • Front: 2x 140 mm
  • Top: 2x 120 mm
  • Rear: 1x 120 mm
• Radiator Mountings:
  • Front: 240 / 280 / 360 mm
  • Rear: 1x 120 mm
• Drive Bays:
  • 2x 3,5" / 2,5"
  • 2x 2,5"
• PCI slots: 7
• I/O Panel:
  • 2x USB-A 3.0
  • 1x USB-A 2.0
  • 1x 3,5 mm HD-Audio
  • 1x Power Button
  • 1x Reset Button
• GPU Clearance:
  • 330 mm
• CPU Cooler: Up to 160 mm
• PSU: max. 180 mm clearance

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.

Виж още Компютърни кутии Kolink
Виж всички Компютърни кутии в категорията