Суич Hikvision DS-3E1318P-EI, 1000Mbps, 18 порта, 16x 10/100Mbps PoE, 1x 10/100/1000Mbps RJ45, 1x 10/100/1000 RJ45 Combo

HikVision DS-3E1318P-EI

General
ShellM: etal material
Net Weight: 1.8 kg
Gross Weight: 3.0 kg
Dimensions (W × H × D): 440.00 mm × 44.00 mm × 220.80 mm
Operating Temperature: 0 °C to 45 °C
Storage Temperature: -40 °C to 85 °C
Operating Humidity: 5% to 95% (no condensation)
Relative Humidity: 5% to 95% (no condensation)
Power Supply: 100-240 VAC, 50/60 Hz, Max. 3 A
Installation Mode: Rack (equipped with mounting ears)
Max. Power Consumption: 150 W
Power Consumption in Idle: 20 W
Surge Protection: 6 kV

Network Parameters
Ports: 16× 10/100 Mbps PoE port, 1× Gigabit RJ45 port, 1× Gigabit combo
MAC Address Table: 16K

Switching Capacity
Whole-Device Performance: 9.2 Gbps
Port Performance: 7.2 Gbps

Packet Forwarding Rate
Whole-Device Performance: 6.84 Mpps

Port Performance: 5.36 Mpps
Internal Cache: 4 Mbits

PoE Power Supply
PoE Standard: IEEE 802.3af,IEEE 802.3at
PoE Power Pin: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE PortPoE: Ports 1 to 16
Max. Port Power: 30 W
PoE Power Budget: 130 W

Software Function
Long Range
Ports 1 to 16: up to 300 m.
Long range performance may vary depend on camera model or cable condition.

VIP Port: Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.

Port Isolation
Ports 1 to 16: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog: Ports 1 to 16: auto detect and restart the cameras that do not respond.

Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 1 aggregation group(s).

Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Suppport 802.1w RSTP.

VLAN
VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 4094 VLAN.

HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.

System Maintenance
Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Supports 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.




Виж още Суич Hikvision
Виж всички Суич в категорията