Точка за достъп Cisco CBW145AC, 2.4GHz (300 Mbps)/ 5GHz (867 Mbps), 3x 10/100/1000 PoE, 1x Gigabit Ethernet uplink

Cisco CBW145AC

Authentication and security
● Wi-Fi Protected Access 2 and 3 (WPA2 and WPA3)
● 802.1X, RADIUS Authentication, Authorization, and Accounting (AAA)
● 802.11r and 802.11i

Maximum clients
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, for a total of 400 clients per access point

Max # of Mesh Extenders
● Maximum number of associated Cisco Business mesh extenders: 25 per Access Point, up to 8 hops

802.11ac
● 2x2 single-user/multi-user MIMO with two spatial streams, up to 867 Mbps
● 20-, 40-, and 80-MHz channels
● Dynamic Frequency Selection (DFS)

Data rates supported
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates on 2.4 GHz: 6.5 to 300 Mbps (MCS0-MCS15, HT 20/40)
802.11ac data rates on 5 GHz: 6.5 to 867 Mbps (MCS0-MCS9)

Available transmit power
settings
2.4 GHz
Up to 20 dBm
5 GHz
Up to 20 dBm

Integrated antennas
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 3 dBi

Interfaces
● 1x Gigabit Ethernet uplink (10/100/1000BASE-T autosensing), PoE
● 3x Gigabit Ethernet local ports (10/100/1000BASE-T), including one PoE out port:
◦ PoE out provides 802.3af (Class 0) when access point is powered by 802.3at, or no output
when powered by 802.3af
● One passive pass-through port, RJ-45 (back to bottom)


Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader
warnings, boot loader errors

Dimensions
(W x L x H)
● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in. (89 x 140 x 31.5 mm)

Weight
● Access point without mounting bracket or any other accessories: 10 oz (280 g)

System
● 1 GB DRAM
● 256 MB flash

Powering options
● 802.3af/at Ethernet switch; a Cisco Business switch with PoE is recommended
● Optional Cisco Business PoE injector (CB-PWRINJ-xx)
● 710-MHz quad-core processor

Power draw ● 8.5W (maximum, without PoE out)

Physical security
● Torx security screw, included with the access point
● Kensington lock slot to lock device to mounting bracket

Compliance
● Safety:
◦ UL 60950-1
◦ CAN/CSA-C22.2 No. 60950-1
◦ UL 2043
◦ IEC 60950-1
◦ EN 60950-1

● Radio approvals:
◦ FCC Part 15.247, 15.407
◦ RSS-247 (Canada)
◦ EN 300.328, EN 301.893 (Europe)
◦ ARIB-STD 66 (Japan)
◦ ARIB-STD T71 (Japan)
◦ EMI and susceptibility (Class B)
◦ FCC Part 15.107 and 15.109
◦ ICES-003 (Canada)
◦ VCCI (Japan)
◦ EN 301.489-1 and -17 (Europe)
◦ EN 50385

● IEEE standards:
◦ IEEE 802.11a/b/g, 802.11n, 802.11h, 802.11d
◦ IEEE 802.11ac

● Security:
◦ 802.11i, WPA2, WAP3, WPA
◦ 802.1X
◦ AES

● Extensible Authentication Protocol (EAP) types:
◦ EAP-Transport Layer Security (TLS)
◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol
Version 2 (MSCHAPv2)

• Документация

• Quick Start Guide
  
  
• Data Sheet
  
  
• Cisco CBW145AC.pdf
  
  
• Ръководство на потребителя за аксес пойнт Cisco CBW145AC.pdf
  
  

Виж още Аксеспойнт/Репитер Безжични Cisco