Кутия Zalman P40 NAMU, ATX/microATX/Mini-ITX, 2x USB 3.0, 5x 120mm вентилатора, с прозорец, бяла, без захранване

Panoramic View with

Seamless Tempered Glasses

Two frameless front and side tempered glasses

showing unique PC build

Premium Tempered Glass Panel

Using 4mm thick tempered glass, P40 NAMU offers

exceptional durability

Easy Accessible I/O ports

ⓐ USB 3.0

ⓑ Microphone / Headphone Jack

ⓒ USB Type-C

ⓓ Reset Button (LED Control Button)

ⓔ Power Button

Vibrant AF120 Lighting Effect

1. The blade vibration is minimized by preventing the

trembling of the blades during fan operation and the

durability is enhanced

2. Wind noise is minimized by suppressing the vortex

phenomenon that occurs on the blades

3. Airflow is maximized by minimizing the amount of

air flow lost to the outer circumference of the rotor

Side (ZM-AF120R)

- Dimensions : 120 x 120 x 26(T)mm

- Rated Voltage :  12V DC (LED: 5V)

- Fan Speed : 800~1,500 ± 10%

- Air Flow : Max. 46.6CFM ± 10%

- Bearing Type : Hydro Bearing

- Connector : 4-Pin(12V) / LED 3-Pin(5V)

Rear (ZM-AF120)

- Dimensions : 120 x 120 x 26(T)mm

- Rated Voltage :  12V DC (LED: 5V)

- Fan Speed : 600~1,500 ± 10%

- Air Flow : Max. 53.72CFM ± 10%

- Bearing Type : Hydro Bearing

- Connector : 4-Pin(12V) / LED 3-Pin(5V)

ARGB CONTROLLER

RGB control hub and LED Control Button(Reset Button)

at side enable variety RGB effects.

Connect to motherboard 5v RGB pin

header to create various RGB modes.

※ How to use ARGB controller

-  Press the I/O LED(Reset) button to change the LED

(Reset) pattern and color.(26 patterns)

-Press and hold the LED(Reset) button for 3 seconds

to sync the motherboard after the white light

flashes once

-Press and hold the LED(Reset) button for 3 seconds

to turn off the LED(Reset) after the white light

flashes twice

-Press the LED(Reset) button again to disconnect the

motherboard sync and change the controller mode