Кутия Axagon EEM2-20GD, за M.2 (2242/2260/2280) SSD, NVMe, USB 3.2 Gen 2x2 Type-C, 2 слота, сива

Input:
• USB 20Gbps (USB 3.2 Gen 2x2), connector USB-C female.
• Compatible with USB 5Gbps, USB 10Gbps, USB 40Gbps, Thunderbolt 3/4/5.

Device support:
• 2x NVMe M.2 SSD disks,
• designed for M key or B+M key card formats,
• 2x NGFF 75-pin M key slot for M.2 drives.

Disk cloning feature:
• Cloning takes place without connecting the station to a computer.
• The target disk must have the same or larger capacity as the source disk, otherwise cloning cannot be started.
• SSD cloning speed up to 2000 MB/s.
• Total cloning time depends on the speed of the disks used and the capacity of the source disk, not on the amount of data stored.

Maximum theoretical supported speeds and compatibility with USB controllers (ports):
• Laptop / PC with USB 20Gbps (USB 3.2 Gen 2x2) port: max. speed 20 Gbit/s.
• Laptop / PC with USB 10Gbps (USB 3.2 Gen 2) port: max. speed 10 Gbit/s.
• Laptop / PC with USB 5Gbps (USB 3.2 Gen 1 / USB 3.0) port: max. speed 5 Gbit/s.
• Compatibility with USB 40Gbps, Thunderbolt 3/4/5 ports: max. speed 10–20 Gbit/s depending on CPU and chipset.
• The real box bandwidth / transmission rate is about 2000 MB/s (2 GB/s), it is given by the limits of the USB 3.2 Gen 2x2 interface.

Other features:
• Supports transmission rates 20.000 / 10.000 / 5.000 Mbit/s.
• Support of M key or B+M key NVMe (PCI Express) M.2 SSD disks without a maximum capacity limit.
• Support of M.2 drives with a size of 2242, 2260, 2280 mm.
• Support of both one-sided and double-sided M.2 SSDs.
• Compliant with PCI Express Base Specification Revision 3.1a specification.
• Compliant with NVM Express 1.4 specification.
• Compliant with USB Mass Storage Class specification.
• Supports BOT (Bulk-Only Transport).
• Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.
• Supports TRIM functionality to limit gradual degradation of the SSD performance over time.
• Supports S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) system monitoring disk condition.
• SSD boot support in external box.
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• Power supply via USB bus up to 900 mA from one USB port is sufficient in all cases.
• Heavy-duty aluminium body and thermal conductive pads, helps to better cooling the M.2 SSD disk.
• Active cooling with integrated fan.
• Mechanical lock of the inner module on the front panel.
• Higher box surface temperature is not a defect – thanks to the aluminum body, the heat generated by the disk operation is better drained and transferred to the environment.
• Connection via USB 3.2 Gen 2x2 type C female connector.
• USB type C male / USB type C male cable length 30 cm in the package.
• Compatible with Windows software RAID (Storage Spaces) and macOS RAID (Disk Utility RAID Assistant).

Other data:
• External box dimensions 143 x 78 x 19 mm (B × D × H).
• Box weight 176 g (without cable, without disk).

Power supply:
• Power via included external AC/DC adapter 12V-2A with 150 cm cable.

LED indication:
• 1x LED indicating the box's power status.
• 2x LED per disk indicate connection (steady light) and data transfer (blinking).
• 4x LED indicate cloning progress 25% - 50% - 75% - 100%. After completion, LEDs remain on.

Supported OS:
• Windows 8.1 / 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android.
• Compatibility depends on the operating system and device manufacturer support.