Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
Single IP management: enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3: facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
Complete session logging: provides detailed information for problem identification and resolution
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization: provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput
Connectivity
IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Auto-MDI/MDIX: adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready: provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models)
IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+)
Security
Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins: controls port-based access for authentication and accountability
Automatic VLAN assignment: assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Latency
100 Mb Latency: < 5 µs
1000 Mb Latency: < 5 µs
Management features
IMC - Intelligent Management Center
limited command-line interface
Web browser
SNMP Manager
IEEE 802.3 Ethernet MIB
24x10/100/1000Base-T
Виж още Суич HP
Виж всички Суич в категорията
Single IP management: enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices
Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
SNMPv1, v2c, and v3: facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
Complete session logging: provides detailed information for problem identification and resolution
Quality of Service (QoS)
Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
Traffic prioritization: provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput
Connectivity
IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
Auto-MDI/MDIX: adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
IEEE 802.3af Power over Ethernet (PoE) ready: provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models)
IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+)
Security
Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
IEEE 802.1X and RADIUS network logins: controls port-based access for authentication and accountability
Automatic VLAN assignment: assigns users automatically to the appropriate VLAN based on their identity, location and time of day
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Latency
100 Mb Latency: < 5 µs
1000 Mb Latency: < 5 µs
Management features
IMC - Intelligent Management Center
limited command-line interface
Web browser
SNMP Manager
IEEE 802.3 Ethernet MIB
24x10/100/1000Base-T
Виж още Суич HP
Виж всички Суич в категорията
Документация
Технически характеристики
Брой портове: | 24 |
---|---|
Максимална скорост: | 1 Gbit/s |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
- 5
- 4
- 3
- 2
- 1
-
Какво пазаруват другите
-
Най-продавани продукти
-
Промоционални продукти
-
116.09 лв
-
47.10 лв
-
84.86 лв
-
304.52 лв
-
107.34 лв
-
25.53 лв
-
16.56 лв
-
458.28 лв
-
12.25 лв
-
34.03 лв
-
580.80 лв
-
57.98 лв
-
171.62 лв
-
211.65 лв
-
132.00 лв
-
366.85 лв
-
56.25 лв
-
1354.90 лв
-
1044.30 лв
-
1747.86 лв
-
204.43 лв
-
178.46 лв
-
83.60 лв
-
1409.75 лв
-
703.25 лв
-
59.28 лв
-
108.40 лв
-
58.56 лв
-
720.71 лв
-
3539.16 лв
-
255.47 лв
-
302.39 лв
-
466.30 лв
-
165.56 лв
-
107.26 лв
-
111.53 лв
-
63.15 лв
-
75.03 лв
-
281.09 лв
-
124.04 лв
132.16 лв
-
49.99 лв
-
25.65 лв
-
21.99 лв
-
18.99 лв
-
38.30 лв
-
30.72 лв
-
31.57 лв
-
29.20 лв
-
39.16 лв
-
37.80 лв
-
36.34 лв
-
26.39 лв
-
39.99 лв
-
819.97 лв
-
1177.49 лв
-
377.63 лв
-
359.99 лв
-
424.99 лв
-
268.99 лв
-
719.99 лв
-
93.86 лв
-
197.33 лв
-
3347.49 лв
-
94.37 лв
-
23.74 лв
-
1440.65 лв
-
22.31 лв
-
27.49 лв
-
399.14 лв
-
238.80 лв
-
1396.28 лв
1439.24 лв -
1396.28 лв
1439.24 лв -
575.04 лв
612.74 лв -
853.41 лв
879.67 лв -
Суич Dahua PFS4226-24ET-360-V3, 28x порта, 24x 10/100 RJ-45 PoE, 2x 10/100/1000 RJ-45 Uplink, 2x SFP741.61 лв
790.25 лв -
152.31 лв
199.84 лв -
178.46 лв
182.12 лв -
415.68 лв
442.94 лв -
176.69 лв
180.32 лв -
127.57 лв
135.94 лв -
124.04 лв
132.16 лв -
241.03 лв
252.99 лв -
52.54 лв
57.99 лв



