Fractal Design Core 3500, Mid Tower, без захранване, черна

Fractal Design Core 3500

Fractal Design Core 3500 is a wide body mid tower ATX case, also available in a Windowed side panel version, allowing users to show off their build. High-performance features include superior liquid cooling potential with support for up to two 240mm radiators or a 280mm radiator

- A wide body mid tower case with bottom-mounted PSU, designed for exceptional airflow and cooling.
- Brushed aluminum-look front panel with a sleek, three-dimensional textured finish
- Superior water cooling support, supporting one 240/280mm radiator in the front and a 240mm radiator in the top
- Featuring a 140mm rear exhaust fan for optimal cooling
- Total 7 fan slots with two Silent Series R2 140mm fans included
- Smart cable management with 22mm of space behind the motherboard plate and thick rubber grommets for clean installations
- Supports extremely tall tower CPU coolers, up to 185mm in height
- Featuring an integrated three-speed fan controller
- Multiple easy-to-clean dust filters designed into the case to help maintain a dust free interior
- Four vibration dampening hard drive trays for up to four 3.5" HDDs, all compatible with 2.5" drives
- Supports extremely long graphics cards up to a maximum length of 430mm in the top four slots, and cards up to 295mm in length in the bottom three slots
- Two additional SSD positions behind the motherboard plate

Specifications:

ATX, E-ATX (up to 295 mm wide) Micro ATX, Mini ITX motherboard compatibility
2 drive bays of 5,25"
4 bays 3.5"- all compatible with SSDs
2 -2.5" dedicated SSD unit position
7 expansion slots
Graphics cards up to 430mm in length may be installed in the upper four slots
With HDD cage in primary position, cards up to 295mm can be installed in bottom three slots
With HDD cage in the secondary position graphics cards up to 260mm are supported in the bottom three slots
Support cooling system: 7 Fan positions (2 fans included)
Filtered fan slots in front and bottom
CPU coolers up to 185 mm in height
Integrated fan controller
ATX PSUs up to 170 mm deep when using the primary bottom fan location for a 140mm fan; when not using this fan location longer PSUs can be used
22 mm of space for cable routing behind the motherboard plate
Thick rubber grommets on all holes on the motherboard plate
Available in Black
Case dimensions (WxHxD):233 x 465 x 517mm

Cooling system:
- Front: 2 - 120mm fans (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed)
- Rear: 1 - 120/140mm fan (included is 1 hydraulic bearing 140mm Silent Series R2 fan, 1000 RPM speed)
- Top: 2 - 120/140mm fan (not included)
- Bottom: 1 - 120/140mm fan (not included, PSU length limits apply)
- Side: 1 -120/140mm fan (not included)
- 1 - integrated fan controller on the backside for up to 3 fans

Water Cooling compatibility
- Front –Slim 240 or 280mm radiator: 15mm fan spacing required for full fastening, radiators with 20mm fan spacing can be used with only the top half fastened to the case. (with lower HDD cage moved to secondary position)
- Front - Thick 240 or 280mm radiators supported with HDD cage in alternate position or completely removed. Motherboards larger than mATX are not fully supported with HDD cage in the tertiary position.
- Top – Slim 240mm radiator (with no components on the upper 11 mm on the motherboard that are taller than 38mm)
- Top – Slim 280mm radiator with slim fans
- Rear – 120/140 mm radiator

Front interface
- 2 - USB 3.0
- Audio in/out
- Power button with LED (white)
- HDD activity LED (white)
- Reset button

Package contents
- Core 3500 computer case
- Accessory box
- User manual

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.

Виж още Компютърни кутии Fractal Design
Виж всички Компютърни кутии в категорията