Кутия Cougar Gaming MX230 RGB, EATX/ATX/microATX/Mini-ITX, 1x USB 3.2 Gen 2 Type-C, 4x 120mm ARGB вентилатора, с прозорец, черна, без захранване

Cougar Gaming MX230 RGB

Mesh-Integrated Front Panel

An all-metal front panel uses a rugged, snap-fit mechanism for a more snug connection that won’t shift or loosen easily. Integrating the ultra-fine mesh filter into the panel allows for tool-less, single-step maintenance without compromising filtration — just pop it out and snap it back into place.

Advanced Bottom-Up Cooling

Most cases stop at two, but the MX230 RGB’s PSU shroud can seat 3 x 120mm fans. A truly porous, high-ventilation cover creates a vertical thermal column that feeds fresh intake directly to your components.

Optimized Component Spacing Space between the motherboard and PSU shroud fans provides ample room for cabling and header connectors, clearing a path for seamless, efficient assembly.
	Optimal PSU Cabin Placement The PSU cabin is offset to the right of the case in contrast to the center placement of conventional PC case design, allowing for extra airflow from the side ventilation panel.
Intake-Maximised Pedestal Perforated diagonal base slopes provide more intake real estate, drawing air through the angled mesh as well as offering a statuesque look.

Refined Aesthetics

The top mesh filter is rimmed with solid borders: preventing fraying and achieving a closer, more unified contact improves tactility and provides a polished and sophisticated appearance.

Synchronized Lighting

The built-in LED controller syncs with the motherboard for seamless system-wide lighting synchronization.

Cooling Capacity

Up to a 360mm AIO can be installed up top. A form factor-defying maximum capacity of 10 fans makes sure your build never burns out.

Future-Ready GPU and Motherboard Compatibility The MX230 RGB is fully compatible with 400mm GPUs and E-ATX motherboards all within a compact mid tower form factor.

Specifications

Case Form Factor: Mid Tower
Motherboard Type: Mini ITX / Micro ATX / ATX / E-ATX
Dimensions (WxHxD): 220 x 475 x 445 (mm) ; 8.7 x 18.7 x 17.5 (in)
I/O Panel: USB 3.2 Gen 2x1 Type-C x 1, USB 3.0 Type-A x 2, 4 Pole Headset Audio Jack x 1, RGB Button
3.5" Drive Bay: 2
2.5" Drive Bay: 1+1(converted from 3.5" drive bays)
Expansion Slots: 7
Maximun Number of Fans: 10
RGB Hub Sync with M/B: Yes
Max. Graphics Card Length: 400 (mm) / 15.7 (in)
Max. CPU Cooler Height: 170 (mm) / 6.7 (in)
Max. PSU Length: 200 (mm) / 7.9 (in) 

Cooling Fan Support

Front: 120mm x 3 / 140mm x 2
Top: 120mm x 3 / 140mm x 2
PSU shroud: 120mm x 3
Rear: 120mm x 1

Water Cooling Support

Top: 360mm / 240mm / 120mm
Rear: 120mm

Pre-installed Fans

Front: 120mm ARGB fan x 3
Rear: 120mm ARGB fan x 1

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.