Точка за достъп Cisco Meraki MR30H, 2.4GHz(400Mbps)/5GHz(866Mbps), 4x Gigabit Ethernet, PoE, Bluetooth

Radios
2.4 GHz 802.11b/g/n/ac client access radio
5 GHz 802.11a/n/ac client access radio
2.4 GHz & 5 GHz WIDS/WIPS, spectrum analysis, and location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with beacon and BLE scanning support
Concurrent operations of all four radios

Operating Bands
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2)
5.470-5.600, 5.660-5.725 GHz (UNII-2e)
5.725 -5.825 GHz (UNII-3)

802.11ac & 802.11n Capabilities
2x2 multiple input, multiple output (MIMO) with two spatial streams
SU-MIMO and MU-MIMO support
Maximal ratio combining (MRC) & Beamforming
20 and 40 MHz channels (802.11n), 20, 40, and 80 MHz channels (802.11ac)
Up to 256 QAM on both 2.4 GHz and 5 GHz bands
Packet aggregation

Power
Power over Ethernet: 37 - 57 (802.3at compatible)
Power consumption: 25W max (802.3at)
802.3af operating mode disables PoE out
Power over Ethernet injector sold separately

Mounting
Mounting hardware included for US, UK, EU, AU & Asia single gang wall jacks

Physical Security
Two security screw options (included)
Concealed mount plate

Environment
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing

Physical Dimensions
6.1” x 4.3” x 0.9” (155 mm x 110 mm x 23 mm), not including mount foot or mount plate
Weight: 14.4 oz (409 g)

Antenna
Integrated omni-directional antennas (3.7 dBi gain at 2.4 GHz, 4.8 dBi gain at 5 GHz)

Interfaces
1 × 10/100/1000 BASE-T Ethernet (RJ45) input
1 × Gigabit Ethernet (RJ45) with 802.3af Power over Ethernet output
3 × Gigabit Ethernet (RJ45) out

Security
Integrated layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1Q) and tunneling with IPSec VPN
PCI compliance reporting
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration

Quality of Service
Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping

Mobility
PMK, OKC, and 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming

LED Indicators
4x 2 Ethernet status for Ethernet ports
1 power/booting/firmware upgrade status


Виж още Аксеспойнт/Репитер Безжични Cisco
Виж всички Аксеспойнт/Репитер Безжични в категорията