HUB USB2-А to 4xUSB2, Handy, AXAGON HUE-X4B

Four-port AXAGON HUE-X4B USB 2.0 READY hub with permanently attached USB cable.

Thanks to a direct USB connector on a short cable, it is always ready to use.

Two USB ports positioned on the sides of the hub for trouble-free connection of any USB device with a large volume of mass around the connector.

Compact and lightweight hub with permanently attached flexible USB cable is a handy helper both at home and while traveling.

Features:
• 4x downstream USB 2.0 port, 1x upstream USB 2.0 port with Type A male connector attached on a 20 cm long cable.
• Fully compatible with USB 2.0 and backward compatible with USB 1.1.
• Supported transmission rates 1.5 / 12 / 480 Mb/s (low / full / high speed).
• Full Plug and Play and Hot Plug support.
• Allows up to 127 USB devices to be connected by cascading.
• Power supply via USB - bus-power mode (5V - 500mA).
• Current overload detection and protection.
• LED to indicate power supply connection.
• Dimensions 78 x 34 x 14 mm, weight 32 g (incl. USB cable).

OS support:
• MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32- and 64-bit Windows OS versions), Mac OS X 10.4.x and higher, Linux with kernel 2.6.x and above.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed and are not even available. 

Package contains:
• USB 2.0 hub with permanently connected 20 cm long cable,
• packed in a double-sided heat sealed blister with clearly indicated parameters and installation procedure.