Смарт превключвател Fibaro Walli Roller FGWREU-111 | Цена от 143.07 лв / 73.15 €

Описание Характеристики Ревюта / Въпроси Вземи на изплащане

FIBARO Wall Roller Shutter is a smart wall switch designed to control roller blinds, awnings, venetian blinds and other single phase, AC powered devices via Z-Wave network.

It measures active power and energy consumed by the controlled load.

You can install it with FIBARO cover plate or other compatible: GIRA System 55 (Standard 55, E2, Event, Event Clear), Legrand Céliane or Schneider Odace (required parts and limitations were described in the full manual).

Technical details:

Dimensions: Height 86 mm, Width 86 mm, Depth 51 mm
Power Supply: 110-230V~50/60 Hz
Recommended external overcurrent protection: 10A type B circuit breaker (EU), 13A type B circuit breaker (Sweden)
Active element: micro-gap relay μ
Required limit switches: electronic or mechanical
Recommended wires: cross-section area between 1.5-4.0mm2
For installation in boxes: Ø = 60mm, depth ≥ 40mm
Operating temperature: 0-35 °C
Ambient humidity: 10–95% RH without condensation
Rated load current: 4A – for motors with compensated power factor (inductive), 13A – for resistive loads
Compatible load types: single-phase AC motors, resistive
Radio protocol: Z-Wave
Transmit power: EIRP max 6dBm
Radio frequency: 868.4 or 869.85 MHz EU
Range: up to 40m indoors(depending on terrain and building structure)

Виж още Смарт автоматизация Fibaro
Виж всички Смарт автоматизация в категорията

Технически характеристики

Тип:	Смарт управляващ модул
Вид:	Управляващо устройство
Приложение:	Комбинирано - за Дома

Добави Ревю / Въпрос

Оцени продукта или задай въпрос?

0.00 от 0 ревюта

Добави ревю | Задай въпрос