Мрежови адаптер ThinkSystem Intel X710-DA2, PCIe 3.0 x4(м) към 1x RJ-45(ж)

The Intel X710 adapters have the following specifications:

• Empty SFP+ cages for 10GbE connection supporting SFP+ transceivers or DAC cables (except the T4 adapter which has RJ45 ports)
• Form factor:
  • X710-DA4: Full-height half-length adapter
  • All other standard PCIe adapters: Low profile adapter
  • All ML2 adapters: Low profile adapter
  • AnyFabric: AnyFabric adapter form factor
• Host interface:
  • PCI Express 3.0; x8
  • PCI Power Management/ACPI Extensions
  • TLP Processing Hint (TPH) Support
  • MSI-X Support
  • Energy Efficient Ethernet
• Performance:
  • Achieves wire-rate throughput on smaller payload sizes (>64 bytes)
  • Standard stack Latency: ~7 µs
  • Kernel- Bypass Latency: ~3 µs
  • Small Packet Developers Tool Kit
• Virtualization features:
  • Microsoft Network Virtualization that uses Generic Routing Encapsulation (NVGRE)
  • VMware Virtual Extensible LAN (VXLAN)
  • Intel Virtual Technology (VT) with VMDq for virtualization
  • SR-IOV direct assignment support
  • Virtual Bridging Support: VEPA/802.1Qbg, BPE/802.1Qbh
  • Virtual Functions: Up to 128 per device
  • Hardware Queue Pairs: Up to 1.5K
• Management features:
  • Advanced filtering capabilities (IPv4, IPv6)
  • SNMP
  • RMON statistic counters
  • Wake on LAN support (WoL support is for ML2 and AnyFabric adapters only; first port only)
  • NC-SI for IMM shared management port connectivity through port 1 (NCSI support is for ML2 and AnyFabric adapters only)
• Additional features:
  • Jumbo Frame Support: 9728 bytes
  • VLAN support
  • Flow Control
  • 1588 Time Synchronization Support
• TCP/IP Layer 2 features:
  • Receive Side Scaling (RSS)
  • Large Send Offload (LSO)
  • TCP/UDP/IP/SCTP Checksum Offload
  • IPv4, IPv6
  • Supports iSCSI as an iSCSI software initiator
• IEEE 802.1Q VLAN support with VLAN tag insertion, with stripping and packet filtering for up to 4096 VLAN tags.
• IEEE 802.3x flow control support.
• IEEE 802.1p Class of Service (CoS)/QoS.
• Support for Advanced Packet Filtering.
• Teaming support:
  • Adapter Fault Tolerance (AFT)
  • Switch Fault Tolerance (SFT)
  • Adaptive Load Balancing (ALB)
  • VM Load Balancing (VMLB)
  • IEEE 802.3ad (link aggregation control protocol)
• Intel PROSet Utility for easy configuration and management.
• UEFI and legacy PXE boot
• Option ROM:
  • PCIe adapter: Disabled on both ports by default.
  • ML2 adapter: Enabled on all ports by default.
  • AnyFabric adapters: Enabled on all ports by default.
• RoHS compliance that is based on latest 2014 standards.