UPS Inform SINUS PREMIUM SPS220, 2000VA/1800W, Online, Tower

Inform SINUS PREMIUM SPS220


Online double conversion technology
Input power factor correction PFC ( >0,99 )
High output power factor ( PF : 0.9 )
Pure sinewave output less than 3% THD
Wide input voltage / Frequency range
Smart RS-232 communication port
Internal SNMP Slot Card Option
Management software compatible
Overload & short circuit protection
Cold start (DC power on)
Smart battery management
Compact size, light weight & low noise

MODEL
SPS 220

Power (kVA) 1 2 3

INPUT
Voltage Range
160VAC ~ 300VAC (@ 0% to 78% Load)
185VAC ~ 260VAC (@ 78% to 89% Load)
210VAC ~ 240VAC (@ 89% to 100% Load)
Frequency 45Hz ~ 65Hz
Power Factor ≥0.99 (@full linear load)

OUTPUT
Output Power Factor 0,9
Voltage 220V / 230V / 240VAC
Voltage Regulation <±1% (till low battery warning signal)
Frequency (Synchronized range) 3Hz or 1Hz (selectable)
Frequency (Battery Mode) 50 / 60Hz±0.1%
Harmonic Distortion <3% (@full linear load), <6% (@full non-linear load)
Crest Factor 3:1
Output Waveform Sinusoidal

Overload Capacity
100%-105% : Continous
106%-120% for 30 seconds
121%-150% for 10 seconds
>150% : Transfer to Bypass
Line Mode efficiency ±>86% ±>87% ±>88%
Battery Mode efficiency ±>85% ±>86% ±>87%
Transfer Time (AC to DC) 0ms
Outlets 2pcs IEC C13 & 1pc Schuko 3pcs IEC C13 & 1pc Schuko 3pcs IEC C13 & 1pc Schuko

BATTERY
Type Maintenance-free lead acid batteries
Recharge Time 5 hours (to 80% of full capacity)
Voltage 24VDC 48VDC 72VDC
Internal Battery 2pcs 12V 7Ah 4 pcs 12V 7Ah 6 pcs 12V 9Ah
Cold Start YES

DISPLAY
LED Display Normal Mode, Battery Mode, Bypass Mode, Self-Test, Weak-Bad Batery, Site Wiring Fault, Fault, Overlaod, Load/Battery Level
LCD Display (Optional) Input/Output/Bypass Voltage, Input/Output/Bypass Frequency, Load%, Battery Voltage, Internal Temperature

ALARMS
Battery Mode, Battery Low, Overload, Failure Events

PROTECTION
Short Circuit Bypass Mode: Fuse, Normal Mode: Output Breaker / Electronic Circuit, Battery Mode: Output Breaker / Electronic Circuit
Battery Battery Discharge Management
EPO UPS shuts down immidiately
Over Temperature Normal Mode: Transfers to Bypass Mode, Battery Mode: UPS shuts down immidiately

COMMUNICATION
Interface (Communication Ports) RS-232 Standard
Options Dry Contact Board, USB Board, SNMP Card

ENVIRONMENT
Temparature 0°C - 40°C
Humidity 0% - 90% (without condensation)
Noise Level (1m Distance) <50dBA
Protection Class IP20

PHYSICAL SPECIFICATIONS
Net Weight (kg) 12 22 27
Dimensions (mm) WxDxH 144x360x220 152x438x322 190x438x322

STANDARDS
Standards EN 62040-1-1 (safety), EN 62040-2(EMC)

ACCESORIES
Internal&External SNMP, Dry Contact Board, Software



Виж още UPS Inform
Виж всички UPS в категорията