Netgear ProSAFE WNDAP350, 300Mbps, Dual Band WiFI Access Point (internal antennas and 2x RSMA for external)

Standards
IEEE 802.11n draft 2.0 specification, 2.4 GHz and 5.0 GHz
IEEE 802.11a 5.0 GHz
IEEE 802.11g, IEEE 802.11b, 2.4 GHz
WMM - Wireless MultiMedia prioritization
WDS - Wireless Distribution System
Power over Ethernet (PoE) IEEE 802.3af
Physical Specifications
Dimensions (W x D x H): 32 x 190 x 124 mm (1.25 x 7.5 x 4.9 in)
Weight: .56 kg (1.2 lb)
Physical Interfaces
One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
Power adapter: 12V DC, 1A; plug is localized to country of sale
Five (5) LEDs: Power, test, 100/1000 Mbps, link/ACT, 2.4 GHz band, 5.0 GHz band
One (1) console port with standard RS-232C interface with DB-9 male connector
Five (5) LED: Power, Link/ACT, LAN, 2.4GHz, 5GHz
Two (2) reverse SMA antenna connectors
Note: Not recommended for use with ProSAFE® Antennas ANT2405, ANT2409 or ANT24D18.
Power
Power over Ethernet required up to 12.8W
Security
Wi-Fi Protected Access (WPA, WPA2)
Wired Equivalent Privacy (WEP) 64-bit, 128-bit encryption
IEEE 802.1x RADIUS authentication with EAP TLS, TTLS, PEAP
Wireless access control to identify authorized wireless network devices
MAC address authentication
VPN pass-through support
Secure SSH telnet
Security Sockets Layer (SSL) remote management login
Network Management
Remote configuration and management through Web browser, SNMP or telnet with Command Line Interface (CLI)
SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB
Advanced Wireless Features
Point-to-point wireless bridge mode
Point-to-multipoint wireless bridge mode
Repeater mode
Simultaneous wireless bridge and access point mode
Wireless Distribution System (WDS)
Adjustable Transmit Power Control (TPC) from 100 mW down to 0 mW




Виж още Аксеспойнт/Репитер Безжични Netgear
Виж всички Аксеспойнт/Репитер Безжични в категорията