Дънна платка INTEL BLKDG31GL, G31, S775, DDR2, VGA, SB2+2, Lan, SerialATA, mATX

Intel® Desktop Board DG31GL

Processor
Processor Support
• Intel® Core™2 Quad processor in the LGA775 package
• Intel® Core™2 Duo processor in the LGA775 package
• Intel® Pentium® Dual-Core processor in the LGA775 package
• Intel® Celeron® processor in the LGA775 package
• Supports Intel® 64 Architecture

Intel® G31 Express Chipset
• Intel® G31 Express Chipset Graphics and Memory Controller Hub
• Intel® 82801GB I/O Controller Hub (ICH7)
• Serial Peripheral Interface (SPI) Flash or Firmware Hub (FWH)

Memory Controller Hub (MCH)
• Designed to support up to 4 GB of system memory using DDR2 800 / 667 SDRAM memory

Intel® ICH7 I/O Controller Hub
• One Ultra ATA100/66 Connector for two devices
• One Floppy Connector
• Two SATA (3.0 Gb/s) ports
• Intel® PRO 10/100 Network Connection
• Two PCI local bus slots

Integrated Intel® ICH7 controllers
• Four back-panel ports (two dual stack)
• Four additional ports (via two headers)

Firmware Hub

System BIOS
• 4 Mb Flash EEPROM with Intel® Platform Innovation Framework for EFI Plug and Play,IDE drive auto-configure
• Advanced configuration and power interface V1.0b, DMI 2.0, multilingual support

System Memory

Memory Capacity
• Two 240-pin DIMM connectors supporting up to two double-sided DIMMs

Memory Types
• DDR2 800 / 667 SDRAM memory support
• Non-ECC Memory

Memory Modes
• Dual-channel operation support

Memory Voltage
• 1.8V

Hardware Management
• Processor fan speed control
• System chassis fan speed control
• Voltage and temperature sensing
• Fan sensor inputs used to monitor fan activity
• Power management support for ACPI 2.0

Expansion Capabilities
• Two PCI bus add-in card connectors

Jumpers and Front-Panel Connectors

Jumpers
• Single configuration jumper design
• Jumper access for BIOS maintenance mode

Front-Panel Connectors
• Reset, HD LED, Power LEDs, power on/off
• One alternate power LED header (1x3)
• Two front-panel Hi-Speed USB 2.0 headers
• Front-panel audio header

Mechanical

Board Style
• ATX 2.2 compliant

Board Size
• 9.6” x 8.6” (24.38 cm x 21.84 cm)

Baseboard Power Requirements
• ATX12V

http://www.intel.com/Assets/PDF/prodbrief/319474.pdf



Виж още Дънни платки за Intel процесори Intel
Виж всички Дънни платки за Intel процесори в категорията