UPS Inform SINUS PREMIUM SPS 210, 1000VA/900W, Online, MiniTower

Power (kVA): 1 Input Voltage Range 160VAC ~ 300VAC (@ 0% to 78% Load) 185VAC ~ 260VAC (@ 78% to 89% Load) 210VAC ~ 240VAC (@ 89% to 100% Load Frequency 45Hz ~ 65Hz Power Factor ≥0.99 (@full linear load) OUTPUT Output Power Factor 0,9 Voltage 220V / 230V / 240VAC Voltage Regulation <±1% (till low battery warning signal) Frequency (Synchronized range) 3Hz or 1Hz (selectable) Frequency (Battery Mode) 50 / 60Hz±0.1% Harmonic Distortion <3% (@full linear load), <6% (@full non-linear load) Crest Factor 3:1 Output Waveform Sinusoidal Overload Capacity 100%-105% : Continous 106%-120% for 30 seconds 121%-150% for 10 seconds >150% : Transfer to Bypass Line Mode efficiency ±>86% Battery Mode efficiency ±>85% Transfer Time (AC to DC) 0ms Outlets 2pcs IEC C13 & 1pc Schuko BATTERY Type Maintenance-free lead acid batteries Recharge Time 5 hours (to 80% of full capacity) Voltage 24VDC Internal Battery 2pcs 12V 7Ah Cold Start YES DISPLAY LED Display Normal Mode, Battery Mode, Bypass Mode, Self-Test, Weak-Bad Batery, Site Wiring Fault, Fault, Overlaod, Load/Battery Level ALARMS Battery Mode, Battery Low, Overload, Failure Events PROTECTION Short Circuit Bypass Mode: Fuse, Normal Mode: Output Breaker / Electronic Circuit, Battery Mode: Output Breaker / Electronic Circuit Battery Battery Discharge Management EPO UPS shuts down immidiately Over Temperature Normal Mode: Transfers to Bypass Mode, Battery Mode: UPS shuts down immidiately COMMUNICATION Interface (Communication Ports) RS-232 Standard Options Dry Contact Board, USB Board, SNMP Card ENVIRONMENT Temparature 0°C - 40°C Humidity 0% - 90% (without condensation) Noise Level (1m Distance) <50dBA Protection Class IP20 Net Weight (kg) 12 Dimensions (mm) WxDxH 144x360x220 STANDARDS Standards EN 62040-1-1 (safety), EN 62040-2(EMC)