UPS Eaton 9PX 5000i RT3U Netpack, 5000VA/4500W, On Line

9PX 5000i RT3U Netpack General: Topology On-line double conversion with PFC (Power Factor Correction) system Configuration Rack/Tower Rating (VA/Watts) 5000/4500 Dimensions (H x W x D, mm) 440 x 130 x 685 Weight (kg) 48 Rail Kit Included Yes Contents (Ships with the following items) 9PX UPS 2 IEC output power cords Eaton Intelligent Power Software CD Network Management Card USB Cable Serial Cable 2 supports for tower mounting 2 brackets for 19’ mounting 2 universal rails cable locking systems Safety guide 10-language user manual Electrical Input: Input Voltage Range 176-276V without derating (up to 100–276V with derating) Nominal Voltage 200/208/220/230/240V Frequency 50/60 Hz autoselection Frequency Range 40-70 Hz Short Circuit Current 90 A THDI <5% Electrical Output: Voltages 200/208/220/230/240V +/– 1% Voltage THD < 2% Overload Capacity 102–110% : 120s, 110–125%: 60s, 125–150%: 10s, >150%: 500ms Efficiency (Normal Mode) Up to 94% in Online mode, 98% in Hi-Efficiency mode Output Frequency 50/60 Hz autoselect, frequency converter as standard Load Crest Factor 3:1 Battery: Battery Management ABM® and Temperature compensated charging method (user selectable), automatic battery test, deep discharge protection, automatic recognition of external battery units. Extended Battery Capability EBM (3U) Communications: User Interface Multilingual graphical LCD display Communication Ports 1 Network management card, 1 USB port, 1 RS232 serial port (USB and RS232 ports cannot be used simultaneously), 4 dry contacts (DB9), 1 mini terminal block for remote On/Off and 1 for remote power Off, 1 DB15 for parallel operation Environmental & Standards: Audible Noise <45dB Operating Temperature 0 to 40°C continuous Safety markings IEC/EN 62040-1, UL 1778, CSA 22.2 EMC Markings IEC/EN 62040 -2 , FCC Class A, IEC/EN 62040-3 (Performance) Approvals CE, CB report (TUV), UL