Точка за достъп Aerohive AP150W, 2.4GHz(300Mbps)/5GHz(1300Mbps), 2x 10/100/1000 Base-T, PoE, 5x вътрешни антени

Aerohive AP150W AP
DNAP150I

Transform any existing Ethernet jack into a versatile and compact
cloud-managed AP and Switch for connectivity ideal for hospitality, cruise
ships, residential halls, or other multi-dwelling-unit deployments.
Aerohive’s AP150W is designed to address key use cases like:

• Higher education - University dorm rooms
• Hospitality – Hotel rooms/suites/cruise ships
• Long term care units
• Multiple Dwelling Units (MDU)
• Retail – In-store connectivity including checkout kiosks

Radio Specifications—802.11a
• 5.150–5.850 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM

Modulation
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback

Radio Specifications—802.11b
• 2.4–2.5 GHz Operating Frequency
• Direct-Sequence Spread-Spectrum (DSSS) Modulation
• Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback

Radio Specifications—802.11g
• 2.4–2.5 GHz Operating Frequency
• Orthogonal Frequency Division Multiplexing (OFDM)

Modulation
• 20 dBm (100 mW) Transmit Power
• Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/ auto fallback

Radio Specifications—802.11n
• 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
• 802.11n Modulation
• 2.4 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps -300Mbps)
• 5 GHz: Rates (Mbps): MCS0 - MCS15 (6.5Mbps - 450Mbps)
• 3x3 Multiple-In, Multiple-Out (MIMO) Radio for 5 GHz
• 2x2 Multiple-In, Multiple-Out (MIMO) Radio for 2.4 GHz
• HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
• HT40 High-Throughput (HT) Support for 5 GHz

Radio Specifications—802.11ac
• 5.150–5.850 GHz Operating Frequency
• 802.11ac Modulation (256-QAM)
• Rates (Mbps): MCS0–MCS9 (6.5Mbps – 1300 Mbps), NSS = 1-3
• 3x3:3 Stream Multiple-In, Multiple-Out (MIMO) Radio
• VHT20/VHT40/VHT80 support
• TxBF ( Transmit Beamforming)

Antennas
• 2x Integrated single band, 2.4-2.5 GHz Omnidirectional antennas
• 3 x Integrated single band, 5.1-5.8 GHz Omnidirectional antennas
• 1 x BLE internal antenna
• 1 x zigbee internal antenna

Interfaces
• Eth0 / POE Input: Autosensing 10/100/1000 Base-T Ethernet

POE Input Port
• Eth1 / PoE Output: Autosensing 10/100/1000 Base-T

Ethernet PoE Output Port
• Eth2 / Eth3: 2x Autosensing 10/100/1000 Base-T

Ethernet Port
• Passive pass thru connection : 2 x RJ-45 port
(from the back of the AP to the bottom)
• Built-in BLE and ZigBee (future use)
• RJ-45 Console Port

Physical
• WxDxH: 4.2” x 1.1” x 6.9” (105.9mm x 29.2mm x 175mm)
• Weight: 0.86 lb / ( 0.39 kg)
• Wallplate Bracket Weight: 0.26 lb ( 0.1 kg)

Environmental
• Operating: 0 to +40°C, Storage: -40 to +70°C
• Humidity: 95%

Mounting
• Wallplate (included with the AP)
• Desk mount (sold as an accessory)

Power Consumption
• 802.3af Input: Typical 11.3W, Max 12.4W
• 802.3at Input: Typical 23.6W, Max 24.9W
(with 12W POE Output Load)
• 48VDC Input: Typical 26.9W, Max 28.2W
(with 15.4W POE Output Load)

Power Options
• IEEE 802.3af / 802.3at (PoE/PoE+)
– With IEEE 802.3af PoE power, AP150W will power up
and the Wi-Fi and Ethernet ports will operate in its full
capacity. In this scenario, POE budget on the downlink
port is not supported
– With IEEE 802.3at PoE power, AP150W will power up
and the Wi-Fi and Ethernet ports will operate in its full
capacity. In this scenario, the available POE budget
on the downlink port is 12W
• Power supply 48VDC, 0.75A (sold as an accessory)
– With 48VDC input, AP150W will power up and the Wi-Fi
and Ethernet ports will operate in its full capacity. In
this scenario, the available POE budget on the downlink
port is 15.4W



Виж още Аксеспойнт/Репитер Безжични Aerohive
Виж всички Аксеспойнт/Репитер Безжични в категорията