UPS MGE Pulsar 700, 700VA/630W, On Line

MGE Pulsar 700

General:
Topology On-line double conversion with automatic by-pass and power factor correction
Configuration Mini Tower
Color metallic grey
Rating (VA/Watts) 700/630
Dimensions (H x W x D, mm) 242 x 153 x 440
Weight (kg) 12.5

Electrical Input:
Input Voltage Without Using Batteries 100/120/140/160 V to 284V for load level <20%, <33%, <66%, >=66% of rated output
Input frequency Range Without Using Batteries 40 to 70 Hz

Electrical Output:
Voltages 230 V (adjustable to 200/208/220/240/250 V)
Remotely controlled sockets 2 independent groups: 2 + 1 IEC C13 (10A) sockets
Output Frequency 50/60 Hz auto-select or frequency converter mode (derated by 15% when used as a frequency converter)

Battery:
Battery Management Automatic weekly test (period adjustable using LCD display or in software supplied), automatic recognition of external battery units =>continuous maximisation of backup time + deep discharge protection

Communications:
User Interface (3) LEDs + adjustable multilingual display: display of measurements, access to control and setup menus
Communication Ports 1 USB port + 1 RS232 serial port and relay contacts (USB and RS232 serial ports cannot be used simultaneously)
1 mini terminal block for remote ON/OFF and emergency stop
Communications Card Slots 1 slot for NMC Minislot card or NMC ModBus/JBus or MC Contacts/Serial



Виж още UPS Eaton
Виж всички UPS в категорията