Дънна платка Gigabyte 790FXTA-UD5, AMD 790FX, AM3, DDR3, 3xPCI-E (CF), SB7.1 Dolby, 2xLan1000, SATA RAID 0,1, 5, 10, 2xSATA 6Gb/s, 2xUSB3.0, 3x1394, ATX

GA-790FXTA-UD5 (rev. 1.0)
AMD 790FX + SB750 Chipset

1. Ultra Durable 3 Technology with copper cooled quality for lower working temperature
2. Revolution energy saving design with Easy Energy Saver technology
3. Supports newest NEC SuperSpeed USB 3.0 with superfast transfer rates of up to 5 Gbps
4. 3X USB power delivery for greater compatibility and extra power for USB devices
5. Provides newest Marvell SE9128 high speed SATA3 storage interface with superfast 6Gbps link speed
6. Supports AMD AM3 Phenom II/ Athlon II processors
7. Advanced 8+2 phase CPU VRM power design for AMD high-TDP 140W CPU support
8. Dual Channel DDR3 1866+ for remarkable system performance
9. 3 PCI-E 2.0 x16 graphics interface with ATI CrossFireX support
10. Smart DualLAN with Intelligent LAN port auto-switching
11. Integrated eSATA/USB combo connectors for enhanced storage flexibility
12. Patented GIGABYTE DualBIOS™ technology delivering highest level failure protection
13. Supports Dolby Home Theater audio to enjoy a rich surround sound experience
14. Power/reset/Clr CMOS onboard button for easily operation on the workbench
15. The Precision OV provides more precision voltage control for system
16. Compatible with Window 7 to deliver the best operation experience
17. Meet European Union EuP(Energy-using Products) requirement

* Only compatible with AM3 CPU, not AM2+/ AM2 CPU, please refer ""CPU support list"" for detail information.
* DDR3 1866+ is supported with combination of AM3 CPU and qualified memory modules, please refer ""Memory Support List"" for detail memory support information.

CPU

1. Support for Socket AM3 processors: AMD Phenom™ II processor / AMD Athlon™ II processor

Hyper Transport Bus

1. 5200 MT/s

Chipset

1. North Bridge: AMD 790FX
2. South Bridge: AMD SB750

Memory

1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
2. Dual channel memory architecture
3. Support for DDR3 1866(OC)(Note 2)/1333/1066 MHz memory modules
4. Support for ECC memory modules (Note 3)

Audio

1. Realtek ALC889 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for Dolby Home Theater
5. Support for S/PDIF In/Out
6. Support for CD In

LAN

1. 2 x Realtek 8111D chip (10/100/1000 Mbit)
2. Support for Teaming
3. Support for Smart Dual LAN

Expansion Slots

1. 2 x PCI Express x16 slots, running at x16
(PCIEX16_1 and PCIEX16_2) (Note 4)
2. 1 x PCI Express x16 slot, running at x8 (PCIEX8) (Note 5)
(The PCIEX16_1, PCIEX16_2 and PCIEX8 slots conform to PCI Express 2.0 standard)
3. 1 x PCI Express x1 slots
4. 3 x PCI slots

Multi-Graphics Technology

1. Support for 2-way/ 3-way ATI CrossFireX™ technology

Storage Interface South Bridge:

1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
3. Support for SATA RAID 0, RAID 1, RAID5, RAID 10 and JBOD

Marvell 9128 chip:

1. 2 x SATA 6Gb/s connectors supporting up to 2 SATA 6Gb/s devices
2. Support for SATA RAID 0 and RAID 1

JMicron JMB362 chip:

1. 2 x eSATA 3Gb/s connectors (eSATA/USB Comobo) on the back panel supporting up to 2 SATA 3Gb/s devices
2. Support for SATA RAID 0, RAID 1 and JBOD

ITE 8720 chip:

1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

IEEE 1394 T.I. TSB43AB23 chip

1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)

USB South Bridge:

1. Up to 10 USB 2.0/1.1 ports (6 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers)

NEC Chip:

1. Up to 2 USB 3.0/2.0 ports on the back panel

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 6 x SATA 3Gb/s connectors
6. 2 x SATA 6Gb/s connectors
7. 1 x CPU fan header
8. 2 x system fan header
9. 1 x North Bridge fan header
10. 1 x power fan header
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x CD In connector
14. 1 x S/PDIF In header
15. 1 x S/PDIF Out header
16. 1 x IEEE 1394a header
17. 2 x USB 2.0/1.1 headers
18. 1 x serial port header
19. 1 x parallel port header
20. 1 x clearing CMOS jumper
21. 1 x clearing CMOS button
22. 1 x power button
23. 1 x reset button

Back Panel Connectors

1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x optical S/PDIF Out connector
4. 1 x coaxial S/PDIF out connector
5. 2 x IEEE 1394a port
6. 4 x USB 2.0/1.1 ports
7. 2 x USB 3.0/2.0 ports
8. 2 x eSATA/USB Combo connectors
9. 2 x RJ-45 port
10. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller

1. ITE IT8720 chip

H/W Monitoring System voltage detection

1. CPU/System temperature detection
2. CPU/System fan speed detection
3. CPU overheating warning
4. CPU/System fan fail warning
5. CPU/System fan speed control (Note 6)

BIOS

1. 2 x 8 Mbit flash
2. Use of licensed AWARD BIOS
3. Support for DualBIOS™
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Unique Features

1. Support for @BIOS
2. Support for Q-Flash
3. Support for Virtual Dual BIOS
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune (Note 7)
8. Support for Easy Energy Saver
9. Support for Time Repair
10. Support for Q-Share

Bundle Software

1. Norton Internet Security (OEM version)

Operating System

1. Support for Microsoft Windows 7/ Vista/ XP

Form Factor

1. ATX Form Factor; 30.5cm x 24.4cm

Note
(Note 1) Due to Windows Vista/XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) To reach DDR3 1866MHz or above, you must install two memory modules and install them in the DDR3_3 and DDR3_4 memory sockets.
(Note 3) Use of a CPU that supports ECC is required if you wish to install ECC memory.
(Note 4) For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
(Note 5) The PCIEX8 slot shares bandwidth with the PCIEX16_2 slot. When PCIEX8 is populated with a PCI Express graphics card, the PCIEX16_2 slot will operate at up to x8 mode.
(Note 6) Whether the CPU/system fan speed control function is supported will depend on the CPU/ system cooler you install.
(Note 7) Available functions in EasyTune may differ by motherboard model.

Remark
1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
2. Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.



Виж още Дънни платки за AMD процесори Gigabyte
Виж всички Дънни платки за AMD процесори в категорията