Ext case USB3 C-to-M.2 SATA, AXAGON EEM2-U3C Alum.

EEM2-U3C USB-C 3.2 Gen 1 - SATA M.2 box

External SuperSpeed USB-C metal box for M.2 SATA SSD disks having size of up 42 to 80 mm.

External box AXAGON EEM2-U3C is designed for SATA M.2 SSD drives. It is equipped with a modern SuperSpeed USB-C connector for easy and reliable connection.
SATA 6G interface with UASP and USB 3.2 Gen 1 support allows you to enjoy the speed of modern M.2 SSD drives.
The external box supports TRIM function to reduce the gradual degradation of SSD performance over time. Booting from an SSD in an external box is also supported.
In external box you can use B key and B&M key SATA M.2 SSDs up to 22x80 mm without limiting the maximum capacity of the SSD.
M.2 cards can be both single-sided or double-sided.

SATA M.2 • B key OR B&M key • ANY CAPACITY • UASP • TRIM

The box is equipped with a double-sided USB-C connector, which offers a convenient and fast connection without having to find the correct orientation of the cable.
The USB-C connector also ensures reliable contact without the risk of accidental disconnection of the external drive.
The included 25 cm connection cable is equipped with the most common and thus the most versatile type A USB connector.
A decently lit blue LED indicates that the computer is connected to the USB port with a permanent light and flashing when transferring the data.
For efficient operation, the external box is programmed to suspend the drive after 5 minutes of inactivity.

USB-C • USB-A CABLE • DECENT LED INDICATION • AUTO SUSPEND

The clever design of the box makes it easy to mount and dismount the M.2 drive thanks to the latches mount.
To complete the assembly, simply screw a single screw into the box body and the external drive is ready for use.
The smart aluminium body is not only durable, but also ensures sufficient SSD cooling.
Installation on supported operation systems is completely automatic. The external drive can be connected
not only to computers and laptops, but also to cell phones and tablets if they have OTG support.

MOUNTING WITH ONE SCREW • ALU CASE •  AUTO INSTALL

Aluminium external box AXAGON EEM2-U3C with USB 3.2 Gen1 (USB 3.0) is designed for SATA M.2 SSD disks.

SATA 6G interface with UASP support allows you to enjoy the speed of modern M.2 SSD drives. The transmission rate amounts to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The external M.2 box also supports other modern functions, e.g. TRIM.

In the external box, SATA M.2 SSD disks with a size up to 22x80 mm can be mounted. The box is not limited by capacity of SSD disks. M.2 cards may be one-sided or double-sided.

Screwless mounting of the inserted M.2 SSD with latches ensures very easy assembly and disassembly, aluminum body allows good cooling.

Insert the M.2 SSD disk into this box and you can easily form a fast and compact external disk.The Box can be used with both computers and laptops, so with mobile phones and tablets with the OTG supporting function.

Input:
•  USB 3.2 Gen 1 (USB 3.1 Gen 1 / USB 3.0) SuperSpeed USB  rate of up to 5 Gbit/s.
• Connection via reversible USB type C female connector.

Device support:
• SATA M.2 SSD disks,
• designed for B+M-key and B-key card formats,
• NGFF 75-pin B-key slot for SATA  M.2 drives.

Other features:
• Compatible with USB 3.2 Gen1 / USB 3.1 Gen 1, USB 3.0 and backward compatible with USB 2.0.
• Supports transmission rates 5000 / 480 Mbit/s (SuperSpeed / HighSpeed).
• Support of B+M-key or B-key SATA (AHCI) M.2 SSDs without maximum capacity limitation.
• Support of M.2 drives with a size of 2242, 2260, 2280 mm.
• Support of both one-sided and double-sided M.2 SSDs.
• Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s).
• The total bandwidth / transmission rate of the box is determined by the USB 3.0 interface used (theoretically up to 5 Gbit/s).
• Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later.
• Support of TRIM functionality to limit gradual degradation of the SSD performance over time.
• SSD boot support in external box.
• Possibility to connect your device while running thanks to the Hot Plug support.
• Full Plug and Play support.
• Standby Support - Drive asleep after 5 minutes of inactivity.
• Supplying the power via USB 3.0 bus up to 900mA from one USB port is sufficient in all cases.
• A decent blue LED indicating the connection to the computer's USB port (permanent light) and data transmission (blinking).
• Connection via USB 3.0 Type-C female connector.
• USB Type-A male /  USB Type-C male cable 25 cm long is included.
• Heavy-duty aluminium body helps to cool the M.2 SSD.

Other data:
• External box dimensions 115 x 39 x 11 mm.
• External box weight 40 g (without USB cable and M.2 SSD disk).

Supported operating systems:
• MS Windows 7 / 8 / 8.1 / 10 and later, Windows Server 2008 / 2012 / 2016 and later (all 32-bit and 64-bit Windows OS versions are supported), Mac OS X 10.x and higher, Linux with kernel 2.6.x and higher.
• Note: Drivers are included with supported operating systems and are installed completely automatically. No other drivers need to be installed.

Package contains:
• USB-C 3.2 Gen 1 external box for SATA M.2 SSD,
• USB type A - type C cable, 25 cm long,
• mounting material and a screwdriver,
• printed installation manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA,
• packed in a cardboard box with clearly indicated parameters.