UPS EATON Pulsar MX 15000 Frame16U

MGE Pulsar MX 15000 Frame16U

High performance UPS upgradeable from 4 kVA to 20 kVA.
Can be used for 20 to 110 servers, ideal for: departmental networks, servers
and workstations.

* 4 / 20 kVA (3/16U)
* True On Line
* 0.9 PF
* Modular UPS
* Hot Swappable Modules
* 2 Load segments
* USB and RS232 ports

Continuous power supply

* Two front access hot-swappables sub-modules (power and battery) for maintenance without load
interruption.
* Automatic battery test (test period can be set).
* Internal bypass built-in to supply the load even if the UPS fails.
* Large input voltage and frequency ranges to avoid using the batteries unnecessarily

Flexible

* Can be used as a free-standing tower unit or 19"""" rack-mounted: only 3U for Pulsar MX 4000 and 5000, 16U for Pulsar MX Frame
* LCD multilingual display with mimic and LEDs for rapid view of the UPS status, diagnostics and event log
* Outputs: IEC 10A and 16A outlet sockets and hardwired outputs
* Built-in Powershare system for remote reboot of the equipment connected, sequential start-up or load shedding while operating from battery to maintain the power to critical loads.
* Pulsar MX Frame is compatible with three phase or single phase supplies.
* Backup time: 10 mins up to 2 hours by adding 3U battery extension modules.

Minimum total cost of ownership (TCO)

* More power with an output power factor of 0.9.
* When the power supply needs to be upgraded, the Pulsar MX 4000 and 5000 can be paralleled to provide 8 kVA or 10 kVA using the ModularEasy kit: without extra cost on the initial purchase.
* Pulsar MX Frame is a modular system with 5 kVA sub-modules paralleled to provide up to 20 kVA or 15 kVA with redundancy.


Specifications:

Rating (kVA) / (kW) 15 kVA / 13, 5 kW

Paralleling

Maximum rating / redundancy(2) 15 kVA / 10 kVA + 5 kVA redundancy 5 kVA + 2 x 5 kVA redundancy


Inputs

Technology:
VFI-SS-113, on-line double conversion with power factor correction, convection cooled static bypass switch

Number of phases, input connections:
L + N or 3P + N, terminals up to 35 mm2 , separate or common AC normal and AC bypass

Nominal voltage
200/208/220/230/240/250 V (L + N) or 380/400/415 V (3P + N)

Voltage range without using battery(3) 120 - 280 V
Input frequency range, THDI 40-70 Hz, < 7%


Outputs

Output connections terminals + 8 IEC C13 (10A) + 4 IEC C19 (16A)

Remotely controlled Powershare sockets:
2 groups (2 IEC C13 10A per group)

Output voltage and frequency(5), THDU, efficiency(6):
200/208/230/240 /250 V, 50 / 60 Hz autoselect, frequency converter as standard, <2%, 97%


Backup time(7)

Pulsar MX standard backup time 8 minutes
Pulsar MX + EXB / MX + 2 EXB / MX + 3 EXB 35min(3EXB)/ 60min(6EXB)/ 90(9EXB)


Communications

Slots 1 minislot or 2 minislots (Frame) compatible with Minislot NMC , NMC ModBus/JBus, MC Contacts/Serial

Ports:
Remote Power off (RJ11), 5 output contacts (DB9), setup using Solution-Pac(USB and DB9-serial ports), EXB module detection (RJ45), paralleling (DB 15)

Operating conditions, standards and approvals

Performance, safety, EMC, surge protection:
IEC/EN 62 040-3, IEC/EN 62 040-1-1, IEC/EN 62 040-2 class A (class B as option), 4 kV IEC 61 643, UL 1778 and CSA 22.2

Operating temperature, noise, approvals, guarantee:
0°C to 40°C continuous, 45 dbA, UL, Tu""""V, GS mark, CB, C-Tick, CE, IEC 61 931, one year

Dimensions / weight

Pulsar MX RT standard backup tower Tower 690 mm high (795 mm casters) x 444.5 mm wide x 735 mm deep /
Pulsar MX RT standard backup rack 250 kg Rack 16U x 444.5 mm wide, compatible with 800-1000 mm deep rack
MX EXB battery unit tower / rack dimensions same as MX Frame / 194 kg for 15 kVA, 239 kg for 20 kVA



Виж още UPS Eaton
Виж всички UPS в категорията