Noctua NH-L12Sx77
 | Performance-enhanced low-profile cooling With 6 instead of 4 heatpipes, the NH-L12Sx77 offers significantly more headroom for higher heat-loads compared to the original NH-L12S. As such, it is ideal for getting the most out of today’s high-end CPUs in compact cases where their aggressive turbo boost modes are especially challenging to handle. |
 | Better performance, better compatibility The NH-L12Sx77 not only improves performance but also motherboard and RAM compatibility versus the original NH-L12S: Due to the x77 version’s taller construction, clearance for RAM modules as well as motherboard heatsinks and shrouds could be increased significantly, which makes the cooler an easy fit in most configurations. |
 | 44mm RAM clearance In its standard orientation with the bends of the heatpipes facing the I/O panel of the motherboard, the NH-L12Sx77 supports RAM modules of 44mm height, making it fully compatible with a wide range of high-end modules (see the Noctua Compatibility Centre). |
 | Exhaust airflow direction The NH-L12Sx77 has its fan pre-installed underneath the fin stack blowing upwards, which is ideal in compact cases that typically have a perforated panel right above the cooler as hot air can be exhausted directly instead of accumulating inside the case. At the same time, this setup avoids noises from influx turbulences that occur when fans are drawing in air through perforated panels. |
 | NF-A12x15 slim 120mm premium fan Featuring sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A12x15 is a premium-grade slim 120mm fan. Its outstanding efficiency enables the NH-L12Sx77 to combine excellent cooling performance with superb quietness of operation. |
 | PWM support and Low-Noise Adaptor The NF-A12x15 120mm fan supplied with the NH-L12Sx77 supports PWM for convenient automatic speed control through the motherboard: full performance under load, virtually silent at idle. In addition, the maximum fan speed can be reduced from 1850 to 1400rpm using the supplied Low-Noise Adaptor for even quieter operation. |
Specification
Cooler Specification
Socket compatibility
Intel LGA1851, LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 and AMD AM5, AM4 socket_compatibility
Height (without fan)
77 height_without_fan
Width (without fan)
128 width_without_fan
Depth (without fan)
131 depth_without_fan
Weight (without fan)
410 weight_without_fan
Height (with fan)
77 height_with_fan
Width (with fan)
128 width_with_fan
Depth (with fan)
131 depth_with_fan
Weight (with fan)
520 weight_with_fan
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating material
NSPR
100 nspr
Fan compatibility
120x120x15 & 120x120x25 fan_compatibility
FAN Specification
Bearing
SSO2 bearing
Max. rotational speed (+/- 10%)
1850 max_rotational_speed
Max. rotational speed with L.N.A. (+/- 10%)
1400 max_rotational_speed_wit
Min. rotational speed @ 20% PWM (+/-20%)
450 min_rotational_speed_pw
Max. airflow
94,2 max_airflow
Max. airflow with L.N.A.
70,8 max_airflow_with_lna
Max. acoustical noise
23,9 max_acoustical_noise
Max. acoustical noise with L.N.A.
16,8 max_acoustical_noise_wit_lna
Input power (max.)
1,56 input_power
Voltage range
12 voltage_range
MTTF
> 150.000 mtbf
JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.
Виж още Процесори Охладители Noctua
Виж всички Процесори Охладители в категорията
| Процесор сокет: | Intel / AMD |
|---|---|
| Водно охлаждане: | Не |
- 5
0 ревюта
- 4
0 ревюта
- 3
0 ревюта
- 2
0 ревюта
- 1
0 ревюта
