Описание Характеристики Ревюта / Въпроси

HPE SSD 1.92TB 2.5inch SATA 6G Very Read Optimized BC 5210

General
Device Type: Solid state drive - hot-swap
Capacity: 1.92 TB
NAND Flash Memory Type Quad-level cell (QLC)
Form Factor: 2.5" SFF
Interface: SATA 6Gb/s
Features: Digitally Signed Firmware
Height: 7 mm
Weight: 500 g
Bundled with: HPE Basic Carrier

Performance
Drive Writes Per Day (DWPD): 0.2
SSD Endurance 700 TB
4KB Random Read: 51000 IOPS
4KB Random Write: 12600 IOPS
Maximum 4KB Random Write: 13000 IOPS
Maximum 4KB Random Read: 63000 IOPS

Expansion & Connectivity
Interfaces: 1 x SATA 6 Gb/s
Compatible Bay 2.5" SFF

Power
Power Consumption
1.71 Watt (idle power)
2.18 Watt (random read)
2.18 Watt (random write)
3.14 Watt (sequential read)
4.36 Watt (sequential write)
2.18 Watt (random read/write)
4.36 Watt (maximum)

Compatibility Information
Designed For HPE ProLiant DL20 Gen10 Plus (2.5"), DL20 Gen10 Plus Base (2.5"), DL20 Gen10 Plus Entry (2.5"), DL20 Gen10 Plus High Performance (2.5"), DL20 Gen10 Plus Performance (2.5"), DL325 Gen10 Plus V2 (2.5"), DL325 Gen10 Plus V2 Base (2.5"), DL325 Gen10 Plus V2 for Weka Base Tracking (2.5"), DL325 Gen10 Plus V2 Performance (2.5"), DL345 Gen10 Plus (2.5"), DL345 Gen10 Plus Base (2.5"), DL345 Gen10 Plus Entry (2.5"), DL360 Gen10 Plus (2.5"), DL360 Gen10 Plus All-NVMe Server for Software Defined Storage (2.5"), DL360 Gen10 Plus for Weka Base Tracking (2.5"), DL360 Gen10 Plus Network Choice (2.5"), DL365 Gen10 Plus (2.5"), DL380 Gen10 Plus (2.5"), DL380 Gen10 Plus Network Choice (2.5"), DL385 Gen10 Plus V2 (2.5"), DL385 Gen10 Plus V2 Base (2.5"), DL385 Gen10 Plus V2 Entry (2.5"), ML30 Gen10 Plus (2.5"), ML30 Gen10 Plus Entry (2.5"), ML30 Gen10 Plus Performance (2.5")
HPE SimpliVity 325 Gen10 Plus V2 Node (2.5")

JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.

Виж още SSD дискове HPE
Виж всички SSD дискове в категорията

Технически характеристики