Noctua NF-S12A PWM product

Вентилатор 120mm, Noctua NF-S12A PWM, 1200rpm

  • Марка: Noctua
  • Код: FANCSNOCTUANFS12APWMВентилатор 120mm, Noctua NF-S12A PWM, 1200rpm
  • Модел: NF-S12A PWM
  • Код на производител: dк1411
  • Гаранция: 60 месеца
  • Налично в централен склад
    37.76 лв

    Всички цени са с начислен ДДС


    Noctua 120mm NF-S12A PWM

    The NF-S12A marks the third generation of Noctua’s signature S12 series quiet case fans, which have received more than 250 awards and recommendations from the international press. Featuring a further refined blade design with Anti-Stall Knobs that works in tandem with the new AAO (Advanced Acoustic Optimisation) frame, the NF-S12A improves the airflow/noise efficiency of its renowned predecessor by up to 8%. The PWM version sports Noctua’s custom designed NE-FD1 IC for fully automatic speed control via 4-pin fan headers and comes with a Low-Noise-Adaptor to reduce the maximum speed during PWM control from 1200 to 900rpm. Its superb running smoothness, SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for quiet case cooling.

    Award-winning S12 design
    The NF-S12A features the third evolution of Noctua’s classic Straight Blade Design that has earned its S12 series countless recommendations from hardware journalists and enthusiasts around the world. Further optimised for even better airflow/noise efficiency, it makes the NF-S12A an ideal quiet case fan.

    Anti-Stall Knobs
    The NF-S12A’s Anti-Stall Knobs reduce flow separation phenomena in medium to high impedance situations and thereby increase the fan’s stall margin. This means that the NF-S12A is even more versatile than its renowned predecessor and can achieve better performance on heatsinks and radiators.

    AAO Frame
    Noctua’s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency.

    Stepped Inlet Design
    Noctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments.

    Surface Microstructures
    With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

    IntegAnti-Vibration Pads
    Integrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.

    Custom designed PWM IC with SCD
    Supporting fully automatic PWM speed control, the NF-S12A PWM uses Noctua’s novel, custom designed NE-FD1 PWM IC that integrates Smooth Commutation Drive (SCD) technology. By providing smoother torque impulses, SCD suppresses PWM switching noises and thus makes the fan quieter at low speeds.

    Low-Noise Adaptor
    The NF-S12A PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 1200 to 900rpm. The L.N.A can be used either to run the fan at a fixed speed of 900rpm or to cap the maximum speed when using automatic PWM control.

    Extensive Cabling Options
    The fan’s short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows to connect a second fan to the same PWM fan header for automatic control.

    SSO2 Bearing
    The NF-S12A features the further optimised second generation of Noctua’s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

    Metal bearing shell
    In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-S12A sports a CNC milled bearing shell made entirely from brass.

    Size 120x120x25 mm
    Connector 4-pin PWM
    Bearing SSO2
    Blade Geometry S-Series with Anti-Stall Knobs
    Frame Technology AAO (Advanced Acoustic Optimisation)
    Rotational Speed (+/- 10%) 1200 RPM
    Rotational Speed with L.N.A. (+/- 10%) 900 RPM
    Min. Rotational Speed (PWM) 300 RPM
    Airflow 107,5 m/h
    Airflow with L.N.A. 83,2 m/h
    Acoustical Noise 17,8 dB(A)
    Acoustical Noise with L.N.A. 10,7 dB(A)
    Static Pressure 1,19 mm H2O
    Static Pressure with L.N.A. 0,73 mm H2O
    Max. Input Power 1,44 W
    Max. Input Current 0,12 A
    Voltage 12 V
    MTBF 150.000 h

    Scope of Delivery:
    Low-Noise Adaptor (L.N.A.)
    4-Pin Y-Cable
    30cm Extension Cable
    4 Vibration-Compensators
    4 Fan Screws

    Виж още Вентилатори Noctua

    Технически характеристики

    Размер:  120 мм

    Свързани продукти и тагове: