Суич Ruijie RG-S5310-24GT4XS-P-E, 28 порта, 24x 10/100/1000Mbps RJ45, 4x 100/1000Mbps SFP+

Interface Specifications

Fixed Ports

24x 10/100/1000 BASE-T ports

4x 1G/10G SFP+ ports

Supports PoE Standards

 IEEE 802.3af, 802.3at

Power Supplies

1+1 redundancy of power modules Up to 720 W of PoE+

Management

Port

1 MGMT port, 1 console port, and 1 USB port, compliant with USB2.0 standard

System Switching Capacity

3.36Tbps

Packet Forwarding Rate

126Mpps

No. of VSU Members

4

MAC Address

ARP Table

4k,16k(authorized)

Routing Table Size

(IPv4)

8K,12k(authorized)

Routing Table Size

(IPv6)

4k

ACL Entries

In: 3500

Out:1500

CPU and Storage  

CPU

Dual-Core CPU, 1.2GHz

Flash Memory

2GB

Dimensions and Weight

Dimensions (W × D × H)

442 mm × 420 mm × 43.6 mm，1 RU

Weight

4.3KG

Power and Consumption

Rated Voltage

S5310-24GT4XS-E、RG-S5310-48GT4XS-E ,AC input：

Rated voltage range: 100 V to 240 V

Frequency: 50/60 Hz

RG-S5310-24GT4XS-P-E、RG-S5310-48GT4XS-P-E,AC input：

Rated voltage range: 200 V to 240 V

Maximum Voltage

RG-S5310-24GT4XS-E、RG-S5310-48GT4XS-E ,AC input：

Maximum voltage range: 90 V to 264 V

Frequency: 50/60 Hz

RG-S5310-24GT4XS-P-E、RG-S5310-48GT4XS-P-E, AC input：

Maximum voltage range: 176 V to 264 V

Maximum Power Consumption

<85W(Non POE)

<810W (PoE full load)

Environment and Reliability

Temperature

Operating temperature: 0℃~45℃

Storage temperature: -40℃ to 70℃

Relative Humidity

Operating humidity: 10% to 90%RH

Storage humidity: 5% to 95%RH

Lightning Protection

10KV (Service Interface)

4KV (MGMT Interface)

Fan Monitoring

Fan speed regulating and alarm function

Ethernet Switching

IEEE 802.1Q (supporting 4K VLANs)

Jumbo frame (maximum length: 9,216 bytes)

Maximum number of VLANs that can be created: 4,094

Voice VLAN

Super VLAN and private VLAN

MAC address-based, port-based, protocol-based, and IP subnet-based VLAN assignment

GVRP

Basic QinQ and selective QinQ

STP (IEEE 802.1.d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

Auto errdisable recovery

BPDU filter

BPDU guard

Port fast

Root guard

ERPS (G.8032)

LLDP/LLDP-MED, LLDP IPv6, and LLDP-POE

IP Service

Static and dynamic ARP, ARP proxy, and ARP entry timeout

DHCP client, DHCP relay, DHCP server, and DHCP snooping

DHCPv6 client, DHCPv6 relay, DHCPv6 server, and DHCPv6 snooping

DNS client, DNS proxy, and DNSv6 client

MAC address filtering

Setting the MAC address aging time

Neighbor Discovery (ND), ND proxy, and ND snooping

GRE tunnel

IP Routing

IPv4 and IPv6 static routing

RIP and RIPng

OSPFv2, OSPFv3, and GR

IS-ISv4 and IS-ISv6

BGP4 and BGP4+

IPv4/IPv6 VRF

IPv4/IPv6 PBR

Multicast

IGMPv1/v2/v3

IGMPv1/v2 snooping

IGMP fast leave

PIM-DM, PIM-SM, PIM-SSM, PIM SMv6, and PIM-SSMv6

MSDP for inter-domain multicast

MLDv1/v2 and MLD proxy

MLDv1/v2 snooping

PIM-SMv6

Multicast source IP address check

Multicast source port check

Multicast querier

ACL and QoS

Standard IP ACLs (hardware ACLs based on IP addresses)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)

Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)

Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

Time based ACLS, ACL 80, and IPv6 ACL

Global ACLs

ACL redirection

Port traffic identification

Port traffic rate limiting

802.1p/DSCP/ToS traffic classification

Congestion management: SP, WRR, DRR, WFQ, SP+WFQ, SP+WRR, SP+DRR, and SP+WFQ

Congestion avoidance: tail drop, RED, and WRED

Eight priority queues per port

Rate limiting in each queue

Security

Multiple AAA modes

RADIUS authentication and authorization

RADIUS and TACACS+

IEEE802.1X authentication, MAC address bypass (MAB) authentication, and interface-based and MAC address-based 802.1X authentication

Web authentication

Hypertext Transfer Protocol Secure (HTTPS)

SSHv1 and SSHv2

Global IP-MAC binding

ICMPv6

Port security

IP source guard

SAVI

ARP spoofing prevention

CPP and NFPP

Multiple attack defense functions

3-tuple binding (IP address, MAC address, and port)

3-tuple binding (IPv6 address, MAC address, and port)

Filtering of invalid MAC addresses

Port- and MAC address-based 802.1x authentication

MAB authentication

Portal authentication and Portal 2.0 authentication

ARP check

DAI

ARP packet rate limiting

Gateway ARP spoofing prevention

Broadcast storm suppression

Hierarchical management of administrators and password protection

BPDU guard

Port protection

Reliability

REUP

RLDP

RLDP, Layer 2 link connectivity detection, and unidirectional link detection

DLDP

IPv4 VRRP v2/v3, IPv6 VRRP, and super-VLAN for VRRP

BFD, RAS, NSR, VRRR, VRRP+, and SDN loop detection

Basic LACP

Inter-VSU AP

Link monitoring, fault notification, and remote loopback based on 802.3ah (EFM)

Hot swapping of power modules

Device virtualization

VSU

Local and remote stacking

Inter-chassis link binding in a stack

Virtualization through standard service interfaces

NMS and maintenance

RSPAN and ERSPAN

sFlow

NTP client, NTP server, NTPv6 client, and NTPv6 server

SNTP

CLI (Telnet/Console)

FTP client, FTP server, FTPv6 client, and FTPv6 server

TFTP client, TFTP server, TFTPv6 client, and TFTPv6 server

FTP and TFTP

SNMP v1/v2/c3

Web

Syslog/Debug

RMON (1, 2, 3, 9)

Various types of RMON groups, including event groups, alarm groups, history groups, and statistics groups, as well as private alarm extension groups

RMON used to implement Ethernet statistics, historical statistics, and alarm functions

NETCONF

MACC

CWMP

gRPC

OpenFlow Special 1.3

Flow table analysis defined by all protocols

Transmission of specified packets to the controller

Configuring the controller's IP address and port

Notifying port status changes to the controller

RNS, configuration rollback, and 802.3ah

1:1 mirroring

N:1 mirroring

1:N mirroring

Flow-based local and remote mirroring

VXLAN

VXLAN (authorized)

PoE

RG-S5310-24GT4XS-P-E and RG-S5310-48GTXS-P-E:

IEEE 802.3af and 802.3at power supply standards

Automatic and energy-saving power supply management modes

Uninterrupted power supply in hot start mode

Scheduled power-on or power-off of PoE ports based on the time policy

Port priority