Бързо зарядно с вградена индуктивна Qi™ технология за безжично зареждане
Осигурява изход до 10W за стандартни Qi™ устройства/като Samsung Galaxy Note 8,S9,S8,S8 Plus,S7,S7 Edge,Note 5,S6 Edge,LG G6 и др./ и до 7,5W за стандартни Qi™ устройства, като iPhone® X/8/8 PLUS и нагоре
Стандартното зареждане осигурява изход до 5W за стандартни Qi™ устройства
Светодиоди показват състоянието на зарядното устройство
Защита от пренапрежение, за безопасно зареждане
Анти-плъзгащата се подложка за сигурно зареждане
Елегантен, компактен и тънък дизайн

Безжично зарядно - 10W
Вход: 5V/2A, 9V/2A, 12V/1.5A
Изход: 5V/1A – 1.5A or 9V/1.1A

Зарядно - Quick Charge™ 3.0
Вход: 100 – 240V, 50/60 Hz, 0.5A
Изход: 5V/3A, 9V/2A, 12V/1.5A

About this product

• • Qi ^™ inductive wireless charging technology
• • Fast charge provides an output of up to 10W for standard Qi ^™ devices and up to 7.5W for standard Qi ^™ devices such as iPhone ^® X/8/8 PLUS
• • Standard charge provides an output of up to 5W for standard Qi ^™ devices.
• • LEDs indicate device and charger status
• • Surge protection to ensure safe charging
• • Anti-slip charging pad keeps devices secure
• • Sleek, compact and thin design

The 10W Wireless Charger is equipped with Qi ^™ inductive wireless charging technology to charge your device at Apple ^® or Android ^™ fast charge speed, up to 5V/1A – 1.5A or 9V/1.1A of power. Perfect for Apple ^®, iPhone ^® X/8/8 PLUS and select Android ^™ devices. Use a QC ^™ 3.0 adapter with your fast pad wireless charger for speedy charging at 7.5W or 10W (according to your phone’s model). The charger also comes with surge protection, overcharging protection, overcurrent and overheating protection, keeping your devices safe.

Support

Quick Install Guide

Specifications

• Hardware
  10W Wireless Charger
  Input	5V/2A, 9V/2A, 12V/1.5A
  Output	5V/1A – 1.5A or 9V/1.1A
  Quick Charge ™ 3.0 Charger
  Input	100 – 240V, 50/60 Hz, 0.5A
  Output	5V/3A, 9V/2A, 12V/1.5A
  Indicator light identification
  Connected to a power outlet	Flashes blue, white 3 times and then white stays lit
  Charging	Fades from warm white to blue 5 times and then turns off
  When not charging properly due to foreign object detection	Flashes blue, then enters protection mode and stops charging until the foreign object is removed
  When not charging properly due to overheating	Flashes blue and white, then enters protection mode and stops charging until the temperature returns to a safe level
  Physical Specifications
  Weight	10W Wireless Charger: Approximately 0.15 lbs / 69g Quick Charge ™ 3.0 Charger: Approximately 0.13 lbs / 58.5g
  Environmental
  Storage Temperature	-20 – 70°C
  Storage Humidity	5 – 95% RH. Non-condensing
  Operation Temperature	0 – 25°C
  Operation Humidity	< 35 – 95% RH. Non-condensing

  
  System Requirements

  • Compatible with all Qi ^™ devices
  • For 10W and 7.5W fast charge, the Quick Charge ^™ 3.0/2.0 charger (included) must be used
  • The fast charge only supports iPhone ^® and select Android ^™ devices.

  
  Note:

  • Use only j5create approved chargers (5V/3A, 9V/2A, 2V/1.5A). Unauthorized chargers may cause damage or the wireless charger may malfunction.
  • To ensure the best charging performance, put the mobile device in the center of the 10W wireless charger. If the mobile device is not properly placed on the 10W wireless charger’s surface (depending on the location of the mobile device’s wireless charging coil), your mobile device may not charge properly.
  • Do not place foreign materials, such as metal objects, magnets or cards with a magnetic strip between the mobile device and the wireless charger. The mobile device may not charge properly or may become damaged due to overheating.
  • Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the wireless charger.