UPS APC BR1200SI, 1200VA/720W, Line interactive, Tower

 

Product Overview

 

• Audible alarms

  Provides notification of changing utility power and UPS power conditions

• Automatic self-test

  Periodic battery self-test ensures early detection of a battery that needs to be replaced.

• Battery failure notification

  Provides early-warning fault analysis on batteries enabling timely preventive maintenance

• Battery replacement without tools

  Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

• Battery-protected and surge-only outlets

  Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

• Boost and Trim Automatic Voltage Regulation (AVR)

  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

• Building Wiring Fault Indicator

  This LED informs users of potentially dangerous wiring problems in the wall circuit.

• Cold-start capable

  Provides temporary battery power when the utility power is out.

• Dataline surge protection

  Provides protection of connected equipment from power surges on the data lines.

• Disconnected battery notification

  Warns when a battery is not available to provide backup power.

• Hot-swappable batteries

  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

• LCD graphics display

  Text and mimic diagrams that display modes of operation, system parameters and alarms.

• PowerChute Personal Edition OS Compatibility

  This software supports numerous operating systems and processors. For further information, please bra href="https://www.apc.com/wp/?um=300"click here./a

• Safety-agency approved

  The UPS is UL1778 Listed

• Sine wave output

  Eliminates humming and heat generated when powering tube lights and fans

• USB connectivity

  Provides management of the UPS via a USB port (not available on all models).

• User-replaceable batteries

  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

 

 

General
Device Type: UPS - external
Colour: Black

Power Device
UPS Technology: Line interactive
Input Voltage: AC 220-240 V
Input Voltage Range: AC 176 - 294 V
Frequency Required: 50/60 Hz ± 3Hz
Input Connectors: 1
Power Output Connectors Details    
6 x power (UPS and surge)
2 x power (surge)
Output Voltage    AC 220-240 V
Power Capacity    720 Watt / 1200 VA
Dataline Surge Protection: Ethernet 10/100/1000Base-T - RJ-45 - 1 input line / 1 output line
Phone line - 1 input line / 1 output line
Output Waveform: Stepped approximation to a sinewave

Battery
Quantity: 1
Technology: Lead Acid
Recharge Time: 16 hours
Features: Sealed

Networking
Remote Management Interface: USB

Expansion / Connectivity
Interfaces: Management (USB)

Miscellaneous
Features: Audible alarm, LCD display, Automatic Voltage Regulation (AVR), overload protection, dataline protection
Compliant Standards: IP20

Dimensions & Weight
Width: 10 cm
Depth: 36.8 cm
Height: 26 cm
Weight: 11.7 kg

Виж още UPS APC
Виж всички UPS в категорията