Тонколони Vestlyd V12C, 2.0, басрефлексни, черни, 39 - 22 000 Hz честотен диапазон

Vestlyd V12C

Coaxial design

The design of Vestlyd is heavily inspired by vintage speakers from the 70s, but the special coaxial construction is more than a fancy design; it has audible advantages too. In this design, the compression tweeter is mounted directly in the back of the motor system of the woofer, solving the crucial time alignment issue between the two drivers. At the same time, the woofer has a horn-like effect on the tweeter, optimizing SPL – an added benefit of the design! We call this special speaker type: Power Monitor.

Wide sweet spot

Most coaxial loudspeakers are tuned to be very direct in their sound, need to be toed in and only really sound good in the absolute sweet spot; especially at high frequencies, they can be very beamy. Vestlyd, however, is designed to have very wide dispersion, with a sweet spot that is much wider than what you'd normally get in speakers like these. With this special coaxial design, you get the best from both worlds: perfect time alignment and an even spread of the sound, even at high frequencies. Consequently, Vestlyd speakers do not need to be toed in!

Made to be loud

Make no mistake: Vestlyd go LOUD. A pair of these speakers can deliver a sound pressure level in excess of 130 dB, effectively giving you concert levels of sound with low distortion. Be aware that listening at these levels can be dangerous for your hearing! We applied advanced FEA (Finite Element Analysis) simulations and measurement equipment to optimize every element – from the voice coil to the cone for high-power performance.

Pristine Hi-Fi & Great Entertainment

• 93 dB sensitivity and incredibly low distortion
• Coaxial design for smooth frequency response
• Custom drivers made to go LOUD
• Even spread of sound with a wide sweet spot
• Cabinet built like a tank

Specifications

Tweeter size

1"

Tweeter type

Laminated titanium dome with high-power neodymium motor

Woofer size

12"

Woofer type

Paper cone with ferrite motor system

Frequency range

39-22.000 Hz

Impedance (ohm)

4

Sensitivity

93

Crossover frequency (hz)

1100 Hz

Speaker connection

Single wire

Terminals

Banana/screw

Cabinet construction

MDF

Additional Features

• 2-way coaxial bass reflex construction with 2 x bass port (front)
• Max. rec. amplifier power: 500 watts

Dimensions (H x W x L)

62.2 x 39.2 x 36.7 cm

Net weight

24 kg