Comex Cover CORE 10K
Comex Cover CORE 10K
ОписаниеХарактеристикиРевюта / ВъпросиВземи на изплащане

Comex Cover CORE 10K

  • True On-Line Double Conversion Technology (EN 62040-3) provides perfect output voltage parameters, regardless of the input voltage and the load.
  • Automatic Bypass (Static Switch) provides continuous load supply in critical conditions, such as overheating or inverter failure.
  • Frequency converter feature lets you set the output frequency to 50Hz or 60Hz.
  • USB, RS-232, Dry Contact for UPS (Uninterruptible Power Supply) and load supervision and control.
  • TVSS surge suppressors and built-in RJ-45 connectors guarantee safety of data send through network.
  • Ethernet Interface for computer-network communication with SNMP protocol support
  • Software controlled output receptacles enable managing groups of load.
  • Small dimensions – all power units have 2U only what makes installation and operation easy and compact.
  • High efficiency reduces heat dissipation and decreases operating costs.
  • ECO-Mode gives possibility of significant cost reduction and in practice stops heat emission. Efficiency up to 99%.
  • Backup time extension possibility provides exact fitting for required autonomy time.
  • Automatic diagnostics ensure that components and parameters are controlled without user interference.
  • High input power factor reduces the value of current drawn from the mains.
  • High output power factor (PF=1 for 6-10kVA) allows load of versatile characteristics to be connected.
  • Wide input voltage range for normal mode ensures that the batteries are used only if necessary - in fact, only when the input voltage is completely lost.
  • Wide input frequency range for normal mode gives possibility for seamless operation with different power sources - as mains or the generating set.
  • Automatic start up ensures maintenance-free operation even after the unit was switched-off after long time mains failure.
  • Advanced Battery Management gives reliability of optimal charging and using batteries, elongates its lifetime and reduces operation costs.
  • Battery start up feature enables unit start up without mains supply.
  • Excellent voltage quality is provided by IGBT inverter and high-frequency PWM modulation method; the output voltage has always stable parameters, independent of input disturbances and load characteristics.
  • High overload capacity indicates power reliability during transient conditions and high resistance on handling faults.
  • Advanced power management software provides full control of UPS.
  • User configurable settings – nominal voltages, frequencies, preferred operating modes, ways of communication – widens the range of possible applications.
  • REPO – enables remote emergency power off, in case of emergency
  • Extra charger inbuilds in 6 and 10kVA models
  • Possibility to parallel units 6 and 10kVA for capacity or redundancy.

    + Internal batteries 20 x 9 Ah (Battery module)

 

Tech specs:

Power10000 VA
10000 W
No. of phases IN : OUT1:1
Input
Nominal voltage208 / 220 / 230 / 240 Vac
Voltage range-30% ÷ +30% @ 100% ≥ load > 80%
-40% ÷ +30% @ 80% ≥ load > 70%
-48% ÷ +30% @ 70% ≥ load > 60%
-52% ÷ +30% @ 70% ≥ load > 0%
Frequency50 / 60 Hz
Frequency range-20% ÷ +20%
THDi<3%
Input power factor≥0,99
Output
Nominal voltage208 / 220 / 230 / 240 Vac
Output power factor1,0
Voltage regulation static/dynamic±1% / ±3%
Frequency50 / 60 ±0,05 Hz
Overload capacity inverter110% - 10min, 130% - 1 min., > 130% - 1 sek.
Efficiency on-line mode>95%
Efficiency eco Mode99%
Controlled socet groupsYes
Creast factor3:1
Batteries
Amount of internal batteries-
Cold startYes
Connector for external batteriesYes
Charging time 4 hours up to 90% capacity
Weight and dimensions
Weight and dimensions of UPS
(W x D x H) [mm]
438 x 665 x 88 (2U)
20,0 kg
Weight and dimensions of battery module
(W x D x H) [mm]
438 x 630 x 133 (3U)
63,0 kg
Communications
Working indicatorLCD panel + sound alarm
CommunicationsStandard: RS232, USB, TVSS, SNMP Slot, REPO
Enviromental
Noise level<50 dB
Operating temperature for UPS0°C ÷ 45°C
Recommended operating temperature for UPS15°C ÷ 25°C
Storage Temperature-25°C ÷ 55°C
Humidity0 ÷ 95% (without condensing)
Standards
StandardsEN 62040-2:2005, EN 62040-2:2006
SafetyIEC62040-1-1, CE, 62040-3 :2001




Виж още UPS Comex
Виж всички UPS в категорията

Технически характеристики

Изходяща мощност:  10000 VA
Тип:  ON Line
Формфактор:  Rack/Tower

Добави Ревю / Въпрос

Оцени продукта или задай въпрос?

0.00 от 0 ревюта
  • 5
    0 ревюта
  • 4
    0 ревюта
  • 3
    0 ревюта
  • 2
    0 ревюта
  • 1
    0 ревюта

Вземи на изплащане

BNP Paribas
BNP Paribas
TBI logo
  • Какво пазаруват другите Какво пазаруват другите
  • Какво пазаруват другите Най-продавани продукти
  • Какво пазаруват другите Промоционални продукти

Свързани продукти и тагове:


Comex Cover CORE 10K
  • Comex Cover CORE 10K