Кабел FTP, 1m, Belden 1633E, 4 pair, Cat 5E

Construction & Dimensions

CAT 5 enhanced FTP PVC

Application

• Horizontal and building backbone cable.
• Support current Category 5 and Category 5 enhanced applications, such as:
10 Base-T, 100 Base-T, 1000 Base-T (Gigabit Ethernet), FDDI, ATM

Standards

• General standards: ISO/IEC 11801, EN 50173
• Future standards like: ISO/IEC 11801 2nd edition, EN 50173 2nd edition und prEN 50288-3-1

Construction & Dimensions

• Construction: shielded 4 twisted pairs
• Conductor: solid bare copper
• Conductor diameter: AWG 24 (0,52 mm)
• Conductor insulation material: Polyethylene (PE)
• Diameter over insulation: 1.10 mm ± 0.05 mm
• Drain wire: AWG 26 tinned copper
• Shield: Aluminium/polyester foil
• Jacket material: PVC (Flame retardant)
• Outer diameter: 6.0 mm ± 0.3 mm

Colour code
Pair 1 White-Blue/Blue
Pair 2 White-Orange/Orange
Pair 3 White-Green/Green
Pair 4 White-Brown/Brown

Electrical characteristics (at 20 ºC)

Nominal mutual capacitance at 1 kHz: 50 nF/km
Maximum conductor DCR: 93,5 Ohm/km
NVP - Nominal Velocity of Propagation: 0.70 c
SKEW – Propagation delay difference (100 MHz): typical ≤ 15 ns/100m
Impedance 1 - 100 MHz: 100 ± 15 Ohm

General and environmental characteristics

Temperature range - operation: -20°C - +60°C
Temperature range - installation: +0°C - +50°C
Minimum bending radius - operation: 24 mm
Minimum bending radius - installation: 48 mm
Maximum pulling tension: 80 N
Flame retardancy: IEC 332-1
Energy of flame: 515 kJ/m
Weight (approx.): 43 kg/km
Maximum operating: voltage 48 V rms
Maximum continuous: current per conductor (25°C) 1.4 A



Виж още Мрежови кабели медни Belden
Виж всички Мрежови кабели медни в категорията