An active converter to connect VGA viewer to a PC with a DisplayPort output

DisplayPort -> VGA active adapter AXAGON RVD-VG to connect an older VGA monitor/TV/data projector to the computer with the DisplayPort output. The hardware converter without the need for any installation or setup ensures high-quality transfer of image at FullHD resolution, or 1920x1200. The reduction is only one-way, i.e. the converter from DisplayPort to VGA, not vice versa. The reduction does not include an audio output. Input: • DisplayPort v1.2 digital interface • DP male connector with latch (M) • connector latch control button Output: • analog VGA interface • D-Sub 15-pin (F) female connector • nuts for securing the VGA cable Supported resolutions: • max. 1920 x 1200 (16:10) WUXGA • 1920 x 1080 (16:9) Full HD/1080p • 1680 x 1050 (16:10) WSXGA+ • 1600 x 1200 (4:3) UXGA • 1600 x 900 (16:9) HD+ • 1440 x 900 (16:10) WXGA+ • 1400 x 1050 (4:3) SXGA+ • 1366 x 768 (16:9) WXGA • 1360 x 768 • 1280 x 1024 (5:4) SXGA • 1280 x 960 (4:3) SXGA- • 1280 x 800 (16:10) WXGA • 1280 x 768 (5:3) WXGA • 1280 x 720 (16:9) HD/WXGA/720p • 1280 x 600 • 1152 x 864 (4:3) XGA+ • 1024 x 768 (4:3) XGA • 800 x 600 (4:3) SVGA • 640 x 480 (4:3) VGA • 576i/576p PAL • 480i/480p NTSC * the resolution will depend on parameters of monitor/TV/projector and graphics adapter. Other features: • supported frequencies 25 MHz – 270 MHz (depending on the input device), • supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area, • DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip, • EDID (Extended display identification data) support - to identify the monitor capabilities and supported graphics modes, • MCCS (Monitor Control Command Set) support - specific commands to control the monitors, • power supply from the DisplayPort input - no external power is needed, • gold-plated connectors for perfect contact and oxidation limitation, • discrete white LED indicating power on, • an Analogix ANX9833 chip is used, • dimensions 45 x 47 x 16 mm, • total length of the cable, incl. connector, is 240 mm, • weight only 36 g, • operating temperature: 0 ~ 40°C, • storage temperature: -10 ~ +85 °C, Supported operating systems: • All versions of MS Windows, Mac OS X, Linux and other operating systems. • It is a pure hardware converter, the transfer is provided only by a chip of the adapter without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used.