prev slider image prev slider hover image
next slider image next slider hover image
AXAGON ADA-HCPD
Икона в кампания
НазадAXAGON ADA-HCPDAXAGON ADA-HCPDAXAGON ADA-HCPDAXAGON ADA-HCPDНапред

Кабел AXAGON ADA-HCPD, от USB-C(м) към USB-C(ж) / Jack 3.5mm(ж), 0.1m, 60W PD, 32-bit/384kHz DAC, черен

id 284663 Код: CABPTAXAGONADAHCPD
  • Модел: ADA-HCPD
  • Марка: AXAGON
  • Код на продукта: ADA-HCPD
  • Съвместимост: Универсален
  • Тип: Кабел
  • От какъв интерфейс: USB C(м)
  • Към какъв интерфейс: USB C(ж) / Jack 3.5mm(ж)
  • Гаранция: 24 месеца
  • Наличност: Стар продукт
    ОписаниеХарактеристикиРевюта / Въпроси
    AXAGON ADA-HCPD

    A stereo 4-pole TRRS connector with automatic CTIA or OMTP standard detection is used to connect headphones. The strength of the cable is ensured by a high-quality nylon braid.

    Input (connection to laptop):
    • 1x USB 480Mbps male connector (USB 2.0)
    • connecting USB connector type C male

    Input (power supply):
    • USB Power Delivery 3.0 60W, USB-C female connector.
    • Charging of the phone from the power adapter via USB-C adapter.
    • PD power must be supported by both the phone (laptop) and the wall charger.

    Audio output:
    • 2-channel analog 32-bit output (3.5 mm TRRS stereo jack):
    • stereo output for headphones or active speakers

    Audio input:
    • analog 16-bit input (3.5 mm stereo jack):
    • microphone input and input for recording analog signal

    Sampling rate, resolution and output converter (DAC) noise:
    • analog - 44.1 - 384 kHz @ 16 / 24 / 32bit (PCM) for playback
    • signal-to-Noise ratio (Output SNR) ≥ 124 dBA 32 Ohm, 30 mW reference signal, 20 Hz - 20 kHz)
    • harmonic distortion (Output THD + N) ≤ -95dB (32 Ohm, 20 mW, 20 Hz - 20 kHz)

    Sampling rate, resolution and input converter (ADC) noise:
    • analog - 48 kHz @ 16 bit (PCM) for recording
    • signal-to-Noise ratio (Input SNR) ≥ 99dB (0 dB gain, Vref = 0.5 Vrms, 20 Hz - 20 kHz)
    • harmonic distortion (Input THD + N) ≤ -90 dB (0 dB gain, Vref = 0.5 Vrms, 20 Hz - 20 kHz)

    Other features:
    • Built-in 30mW @ R=32 Ohm headphones amplifier.
    • Impedance range of connected headphones 16 - 200 Ohm.
    • Frequency range 20 Hz - 20 kHz.
    • USB 480Mbps interface (USB 2.0, backward compatible with USB 1.1).
    • Easy to install thanks to full Plug and Play support.
    • Possibility to connect your device while running thanks to the Hot Plug support.
    • 3.5 mm jack, TRS, TRRS (CTIA & OMTP autodetection) compatible.
    • Compliant with the USB Audio Device Class specification v1.0.
    • Adapter power supply via USB (bus power) - no auxiliary power supply required.
    • Dimensions of the 3.5 mm jack 25 x 7 mm.
    • Dimensions USB-C male connector 25 x 11 x 6 mm.
    • Dimensions USB-C female connector 30 x 11 x 6 mm.
    • Adapter length 10 cm.
    • Weight only 10 g.

    Setting up a sound card in Windows allows:
    • Adjusting volume and balance of speakers
    • settings for listening to the microphone
    • extended speaker features: virtual surround sound, Dolby Atmos support
    • Setting the sampling rate and bit depth for reproduction

    Sound card settings in Android allow:
    • Adjusting volume and balance of speakers
    • extended speaker features: virtual surround sound, Dolby Atmos support
    • immersive sound

    Sound card settings in iOS / iPadOS allow:
    • volume setting
    • hearing protection
    • optimization for balanced sound

    Supported operating systems:
    • Windows 10 / 11 and later, macOS, iPadOS, iOS, Linux, Chrome OS and Android

    Input
    interface: USB 2.0
    interface: USB Power Delivery 3.0
    connector: USB Type C male on the cable
    connector: USB-C female
    cable: 10 cm, permanently connected

    Audio outputs
    analog output: 2-channel stereo output for headphones or active speakers
    sampling rate: 44.1 / 384 kHz analog
    resolution: 16 / 24 / 32 bit (PCM) for playback
    signal-to-noise ratio: ≥ 124 dB (Output SNR) pro DAC
    harmonic distortion: ≤ -95 dB (Output THD+N)
    connector: 3.5 mm TRRS stereo jack

    Audio inputs
    analog input: 2-channel stereo microphone input
    sampling rate: 44.1 / 48 kHz analog
    resolution: 16 bit for recording
    signal-to-noise ratio: ≥ 99 dB (Input SNR) pro ADC
    harmonic distortion: ≤ -90dB (Input THD+N)
    connector: 3.5 mm stereo jack

    Supported features
    automatic installation: yes
    Plug and Play: yes
    Hot Plug: yes

    Other features
    dimensions: 25 x 7 mm
    weight: 4 g

    Power supply
    on the bus: yes (USB bus power)

    OS support
    iPadOS: yes
    iOS: yes
    MS Windows: 10 / 11 and higher
    MS Windows Server: yes
    Mac OS: yes
    Linux: yes
    8595247908759




    Виж още Кабели за Телефони, Таблети AXAGON
    Виж всички Кабели за Телефони, Таблети в категорията
    Технически характеристики
    Съвместимост:  Универсален
    Тип:  Кабел
    От какъв интерфейс:  USB C(м)
    Към какъв интерфейс:  USB C(ж) / Jack 3.5mm(ж)
    Добави Ревю / Въпрос
    Оцени продукта или задай въпрос?
    0.00 от 0 ревюта
    • 5
      0 ревюта
    • 4
      0 ревюта
    • 3
      0 ревюта
    • 2
      0 ревюта
    • 1
      0 ревюта
    • Какво пазаруват другите Какво пазаруват другите
    • Какво пазаруват другите Най-продавани продукти
    • Какво пазаруват другите Промоционални продукти
    prev slider image prev slider hover image next slider image next slider hover image

    AXAGON ADA-HCPD
    Кабел AXAGON ADA-HCPD, от USB-C(м) към USB-C(ж) / Jack 3.5mm(ж), 0.1m, 60W PD, 32-bit/384kHz DAC, черен
    AXAGON ADA-HCPD
    prev slider image prev slider hover image
    • AXAGON ADA-HCPD
    • AXAGON ADA-HCPD
    • AXAGON ADA-HCPD
    • AXAGON ADA-HCPD
    • AXAGON ADA-HCPD
    • AXAGON ADA-HCPD
    next slider image next slider hover image