Памет 16GB (2x8GB) DDR5 6000MHz, Kingston FURY Beast, KF560C40BBK2-16, 1.35V

DESCRIPTION

Kingston FURY KF560C40BBK2-16 is a kit of two 1G x 64-bit (8GB)
DDR5-6000 CL40 SDRAM (Synchronous DRAM) 1Rx16, memory
module, based on four 1G x 16-bit FBGA components per module.
Each module kit supports Intel® Extreme Memory Profiles
(Intel® XMP) 3.0. Total kit capacity is 16GB. Each module
has been tested to run at DDR5-6000 at a low latency timing of
40-40-40 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR5-4800 timing of 40-39-39 at 1.1V.
Each 288-pin DIMM uses gold contact fingers. The JEDEC
standard electrical and mechanical specifications are as
follows:

SPECIFICATIONS

CL(IDD)	40 cycles
Row Cycle Time (tRCmin)	48ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)	295ns(min.)
Row Active Time (tRASmin)	32ns(min.)
UL Rating	94 V - 0
Operating Temperature	0 C to +85 C
Storage Temperature	-55 C to +100 C

FEATURES

• Power Supply: VDD = 1.1V Typical
• VDDQ = 1.1V Typical
• VPP = 1.8V Typical
• VDDSPD = 1.8V to 2.0V
• On-Die ECC
• Height 1.37” (34.9mm), w/heatsink

FACTORY TIMING PARAMETERS

• Default (JEDEC): DDR5-4800 CL40-39-39 @1.1V
• XMP Profile #1: DDR5-6000 CL40-40-40 @1.35V
• XMP Profile #2: DDR5-5600 CL40-40-40 @1.25V
• XMP Profile #3: DDR5-4800 CL38-38-38 @1.1V

• Документация

• Kingston FURY Beast Datasheet
  
  

Виж още Настолни компютри Памети Kingston