Памет 8GB DDR4 2933MT/s, HyperX Fury HX429C17FB2/8, 1.2V

HyperX Fury 8GB DDR4 2933Mhz PC4-23400
HX429C17FB2/8

DESCRIPTION

HyperX HX429C17FB2/8 is a 1G x 64-bit (8GB) DDR4-2933 CL17 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2933 at a low latency timing of 17-19-19 at 1.2V.
Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

JEDEC/XMP TIMING PARAMETERS
• JEDEC/PnP: DDR4-2933 CL17-19-19 @1.2V
• XMP Profile #1: DDR4-2933 CL17-19-19 @1.2V
• XMP Profile #2: DDR4-2666 CL16-18-18 @1.2V

FEATURES

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.340” (34.04mm), w/heatsink

SPECIFICATIONS

CL(IDD) 17 cycles
Row Cycle Time (tRCmin) 45.75ns(min.)
Refresh to Active/Refresh
Command Time (tRFCmin) 350ns(min.)
Row Active Time (tRASmin) 26.55ns(min.)
Maximum Operating Power TBD W*
UL Rating 94 V - 0
Operating Temperature 0°C to +85°C
Storage Temperature -55°C to +100°C



Виж още Настолни компютри Памети HyperX
Виж всички Настолни компютри Памети в категорията