Ultrastar™ A7K2000
3.5-Inch Enterprise 7200 RPM
Hard Disk Drives
The Ultrastar A7K2000 delivers up to 1TB of storage capacity in a standard 3.5 form factor, filling a vital need for high-density storage in the enterprise. With a unique 5-platter design, Hitachi has relaxed the bit densities to achieve higher reliability. The Ultrastar A7K2000 is built using the industry s most reliable perpendicular magnetic recording recording heads and media. The Ultrastar A7K2000 features a 3 Gb/s SATA interface supporting key features in the Serial-ATA specification including Native Command Queuing , staggered spin-up and hot-swap capability
Configuration
Interface SATA 3Gb/s
Capacity (GB) at 512 bytes/sector 1TB
Sector size (bytes) 512
Max. areal density (Gbits/sq. in) 2TB 285
Performance
Data buffer (MB) 32
Rotational speed (RPM) 7200
Interface transfer rate (MB/s, max) 300
Sustained transfer rate (MB/s, typical) 134
Seek time (read, ms, typical) 2TB 8.2
Reliability
Error rate (non-recoverable, bits read) 1 in 10
Load/unload cycles (at 40° C) 300,000
Availability2 (hrs/day x days/wk) 24x7
MTBF2 (M hours) 1,200,000
Acoustics
Idle (Bels, typical) 2TB 2.9
Power
Requirement +5 VDC (+/-5%), +12 VDC (+10%/-8%)
Startup current (A, max.) 2.0 (+12V), 1.2 (+5V)
Read/write (W) 2TB 11.1
Unload idle (W) 2TB 5.6
Power consump. efficiency index (W/GB) 0.0039
Physical size
z-height (mm) 26.1
Dimensions (width x depth, mm) 101.6 (+/-0.25) x 147
Weight (g, max) 2TB 740
Environmental (operating)
Ambient temperature 5o to 60o C
Shock (half-sine wave, G) 70
Vibration (G RMS, 5 to 500 Hz) 0.67 (XYZ)
Environmental (non-operating)
Ambient temperature -40o to 70o C
Shock (half-sine wave, 1ms, G) 2TB 300
http://www.hgst.com/tech/techlib.nsf/techdocs/5EDA5472B7792D9D8625760A0003E88B/$file/UltraStarA7K2000_datasheet.pdf
Виж още Твърди дискове Вътрешни Hitachi
Виж всички Твърди дискове Вътрешни в категорията
3.5-Inch Enterprise 7200 RPM
Hard Disk Drives
The Ultrastar A7K2000 delivers up to 1TB of storage capacity in a standard 3.5 form factor, filling a vital need for high-density storage in the enterprise. With a unique 5-platter design, Hitachi has relaxed the bit densities to achieve higher reliability. The Ultrastar A7K2000 is built using the industry s most reliable perpendicular magnetic recording recording heads and media. The Ultrastar A7K2000 features a 3 Gb/s SATA interface supporting key features in the Serial-ATA specification including Native Command Queuing , staggered spin-up and hot-swap capability
Configuration
Interface SATA 3Gb/s
Capacity (GB) at 512 bytes/sector 1TB
Sector size (bytes) 512
Max. areal density (Gbits/sq. in) 2TB 285
Performance
Data buffer (MB) 32
Rotational speed (RPM) 7200
Interface transfer rate (MB/s, max) 300
Sustained transfer rate (MB/s, typical) 134
Seek time (read, ms, typical) 2TB 8.2
Reliability
Error rate (non-recoverable, bits read) 1 in 10
Load/unload cycles (at 40° C) 300,000
Availability2 (hrs/day x days/wk) 24x7
MTBF2 (M hours) 1,200,000
Acoustics
Idle (Bels, typical) 2TB 2.9
Power
Requirement +5 VDC (+/-5%), +12 VDC (+10%/-8%)
Startup current (A, max.) 2.0 (+12V), 1.2 (+5V)
Read/write (W) 2TB 11.1
Unload idle (W) 2TB 5.6
Power consump. efficiency index (W/GB) 0.0039
Physical size
z-height (mm) 26.1
Dimensions (width x depth, mm) 101.6 (+/-0.25) x 147
Weight (g, max) 2TB 740
Environmental (operating)
Ambient temperature 5o to 60o C
Shock (half-sine wave, G) 70
Vibration (G RMS, 5 to 500 Hz) 0.67 (XYZ)
Environmental (non-operating)
Ambient temperature -40o to 70o C
Shock (half-sine wave, 1ms, G) 2TB 300
http://www.hgst.com/tech/techlib.nsf/techdocs/5EDA5472B7792D9D8625760A0003E88B/$file/UltraStarA7K2000_datasheet.pdf
JAR Computers може да предложи ремонт/смяна/монтаж в наш сервиз или при партньор.
Виж още Твърди дискове Вътрешни Hitachi
Виж всички Твърди дискове Вътрешни в категорията
Технически характеристики
Размер: | 3.5" (8.89cm) |
---|---|
Капацитет: | 1000 GB |
Интерфейс: | SATA2 |
Обороти: | 7200 rpm |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
0.00 от 0 ревюта
- 5
- 4
- 3
- 2
- 1