An active mini converter to connect a VGA viewer to the PC with HDMI output.
Audio out.
Product Description:
An HDMI -> VGA active mini adapter AXAGON RVH-VGAM with an audio output to connect an older VGA monitor/TV/data projector to the computer with the HDMI output. The hardware converter without the need for any installation or setup ensures high-quality transfer of image at FullHD resolution 1920x1080. The reduction is only one-way, i.e. the converter from HDMI to VGA, not vice versa. The converter includes a stereo output for connecting headphones or active speakers. Thanks to the built-in microUSB connector to supply additional power, it is not a problem to connect devices with a lower power supply to the HDMI output such as Raspberry Pi, Apple TV, some Smart TV boxes and others. When connecting to a desktop PC or a notebook, additional power is not needed. Thanks to an audio connector installed on the adapter rear side, the audio cable does not prevent from using other notebook´s ports, as is the case for adapters with the connector located on the adapter´s lateral side. Input: • HDMI v1.4 digital interface • HDMI A (M) male connector Output: • analog VGA interface • D-Sub 15-pin (F) female connector • 2-channel analog 16 / 24-bit output (3.5mm stereo jack): stereo output for headphones or active speakers Parameters of D/A audio converter: • sampling rate up to 200 kHz, 24 bit • signal-to-Noise ratio (SNR output) ≥ 105 dB • harmonic distortion (THD + N output) ≤ -90 dB Supported resolutions: • max. 1920 x 1080 (16:9) Full HD/1080p • 1680 x 1050 (16:10) WSXGA+ • 1600 x 1200 (4:3) UXGA • 1600 x 900 (16:9) HD+ • 1440 x 900 (16:10) WXGA+ • 1400 x 1050 (4:3) SXGA+ • 1366 x 768 (16:9) WXGA • 1360 x 768 • 1280 x 1024 (5:4) SXGA • 1280 x 960 (4:3) SXGA- • 1280 x 800 (16:10) WXGA • 1280 x 768 (5:3) WXGA • 1280 x 720 (16:9) HD/WXGA/720p • 1280 x 600 • 1152 x 864 (4:3) XGA+ • 1024 x 768 (4:3) XGA • 800 x 600 (4:3) SVGA • 640 x 480 (4:3) VGA • 576i/576p PAL • 480i/480p NTSC Other features: • supported rates 25 MHz – 200 MHz (depending on the input device) • YCC-to-RBG conversion supported • support for HDCP to prevent copying video and audio content • DDC (Display Data Channel) support - Intelligent setting of resolution, frequency and other parameters according to the source graphics chip • EDID (Extended display identification data) support - to identify the monitor capabilities and supported graphics modes • MCCS (Monitor Control Command Set) support - specific commands to control the monitors • supported modes: mirroring the primary monitor area (default setting), expanding the primary monitor area • power supply from HDMI inputs; if needed, an auxiliary power supply is ensured via microUSB • possibility of additional power supply via microUSB connector if the power level from HDMI output is lower than the standard level • gold-plated connectors for perfect contact and oxidation limitation • a Chrontel CH7101B chip is used (HDMI-to-VGA convertor) + Cirrus Logic CS4344 (stereo D/A convertor) • compact dimensions 47 x 23 x 23 mm • weight 13 g • length of the audio cable is 80 cm • operating temperature: 0 ~ 40°C • storage temperature: -10 ~ +85 °C Supported operating systems: • All versions of MS Windows, Mac OS X, Linux and other operating systems. • It is a pure hardware converter, the transfer is provided only by a chip of the adapter without computer participation, no drivers are installed, so the compatibility is not dependent on the operating system used.