UPS Eaton 9E 10000i, 10000VA/8000W, On-Line, Tower

Eaton 9E 10000i

 

Reliability and performance
• The Eaton 9E constantly monitors power conditions and regulates voltage and frequency due to the online double conversion topology
• Power more servers than most similar UPSs due to a 0.8 power factor
• Trust a leading manufacturer with decades of experience and high quality standards: CE compliance certified by external agency (CB report from the TUV)

 

Manageability
• Get clear information on the UPS’ status and measurements (load level, battery level, input/output voltage and frequency) on a single screen with the new LCD interface
• Easily communicate with the UPS through USB, RS232 serial or over the network with the optional network card (Network-MS). Relay cards or ModBus cards are also available.
• Integrate 9E into all software environments. The Eaton 9E is delivered with Eaton’s Intelligent Power™ Software and is compatible with all major OS including advanced integration in VMware vCenter and Microsoft Hyper-V.

 

Flexibility
• The internal bypass allows service continuity in case of an internal fault. A maintenance bypass is also available as standard for easy maintenance of the UPS without powering down critical systems.
• Make your installation more flexible with a combo input (3:1 and 1:1) on the 10kVA, 15kVA, and 20kVA
• Extend runtime as you like by adding up to 4 external battery modules (EBM). For extra-long runtime, XL models with internal supercharger are also available at 10kVA and 20kVA.

 

General specifications
Product Length/Depth
61.29 cm
Product Height
70.85 cm
Product Width
26.24 cm
Product Weight
85.39 kg
Compliances
CE Marked
TUV
Certifications
IEC/EN 62040-1
IEC/EN 62040-2
CE
EAC

Battery
Battery type
Sealed, lead-acid
Runtime graph
View runtime graph
Battery replacement
Replacable batteries
Battery quantity
20
Battery management
Automatic battery test
Deep discharge protection
Battery rating
12 V / 9 Ah
Extended battery capability
Yes

Electrical output
Voltage
230/400V
Wattage
8 kW
Output power factor
0.8
Output voltage range
220/230/240 V +/- 2%
Output waveform
Sine wave
Output nominal voltage
230V default (220/230/240V)
Voltage distortion output (linear load) - max
3
Feed type
1
Topology
Online/Double-conversion
VA rating
10 kVA

Electrical input
Input connection
Hardwired/fixed connection
Input nominal voltage
230V default (220/230/240V)
Nominal frequency
50/60 Hz
Input power factor
>.99
Input voltage range
176-276 V (110-276 V with derating)
Input frequency range
45-66Hz

Communications
Communication
USB port (HID compliant)
Serial port (RS232)
Mini-terminal block for remote power off
Communication slot
User interface
LCD Display
Potential free switch contact
Yes
Expansion slots
One slot for optional communication card
Software compatibility
Eaton Intelligent Power Manager, Eaton Intelligent Power Protector
Type of interface
Other

Environmental
Altitude
3000 m
Noise level
<55 dB at 1 meter
Temperature range
0° to 40°C (32° to 104°F)
Relative humidity
0-95% non-condensing

Additional specifications
Construction type
Free standing model
Package contents
UPS
USB cable
Serial cable
User manual
Phase (output)
1
Internal bypass
Yes
Auto shutdown function
Yes
Color
Black
Efficiency
92

Виж още UPS Eaton
Виж всички UPS в категорията