HPE Aruba IAP-334 (RW) Instant (JW817A)
HPE Aruba IAP-334 (RW) Instant (JW817A)

Точка за достъп HPE Aruba IAP-334 (RW) Instant, 2.4GHz(800Mbps)/5GHz(1733Mbps), 1xLan 10/100/1000 PoE, 4x вътрешни антени

id 117057 Код: NTWBHPEJW817A
  • Модел: Aruba IAP-334 (RW) Instant (JW817A)
  • Марка: HPE
  • Гаранция: 99 месеца
  • Код на продукта: JW817A
  • Безжична скорост: 1700 Mbps
  • Wi-Fi Стандарт: Wi-Fi 5 (802.11ac)
  • Честота: 2.4 & 5 GHz
  • Антени: 4 Вътрешни
  • PoE: In
  • Интерфейс: 1x 1000
  • Наличност: Стар продукт
    ОписаниеХарактеристикиРевюта / ВъпросиДокументация
    HPE Aruba IAP-334 (RW) Instant
    (JW817A)

    SPECIFICATIONS
    IAP-334 (Instant):
    - 802.11ac – 5 GHz 4x4 MIMO (1,733 Mbps max rate) and 2.4 GHz 4x4 MIMO (800 Mbps max rate) radios, with a total of four dual-band RP-SMA connectors for external antennas

    WI-FI RADIO SPECIFICATIONS
    • AP type: Indoor, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 4x4 MIMO
    - In addition to 802.11n, the 2.4 GHz radio supports all 802.11ac features as well (proprietary extension)
    • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)
    • 5 GHz:
    - Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4x4 VHT80 or 2x2 VHT160 client devices
    - Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously
    • 2.4 GHz: Four spatial stream Single User (SU) MIMO for up to 800 Mbps wireless data rate to individual 4x4 VHT40 client devices (600 Mbps for HT40 802.11n client devices)
    • Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
    • Supported frequency bands (country-specific restrictions apply):
    - 2.400 to 2.4835 GHz
    - 5.150 to 5.250 GHz
    - 5.250 to 5.350 GHz
    - 5.470 to 5.725 GHz
    - 5.725 to 5.850 GHz
    • Available channels: Dependent on configured regulatory domain
    • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
    • Supported radio technologies:
    - 802.11b: Direct-sequence spread-spectrum (DSSS)
    - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • Supported modulation types:
    - 802.11b: BPSK, QPSK, CCK
    - 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
    • Transmit power: Configurable in increments of 0.5 dBm
    • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
    - 2.4 GHz band: +24 dBm (18 dBm per chain)
    - 5 GHz band: +24 dBm (18 dBm per chain)
    - Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
    • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
    • Maximum ratio combining (MRC) for improved receiver performance
    • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
    • Short guard interval for 20 MHz, 40 MHz, 80 MHz and 160 MHz channels
    • Space-time block coding (STBC) for increased range and improved reception
    • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
    • Transmit beam-forming (TxBF) for increased signal reliability and range
    • Supported data rates (Mbps):
    - 802.11b: 1, 2, 5.5, 11
    - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    - 802.11n: 6.5 to 600 (MCS0 to MCS31)
    - 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
    • 802.11n high-throughput (HT) support: HT 20/40
    • 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
    • 802.11n/ac packet aggregation: A-MPDU, A-MSDU

    WI-FI ANTENNAS
    • AP-334/IAP-334: Four RP-SMA connectors for external dual band antennas. Internal loss between radio interface and external antenna connectors (due to diplexing circuitry): 2.3 dB in 2.4 GHz and 1.2 dB in 5 GHz.
    • AP-335/IAP-335
    - Four (vertically polarized) integrated 2.4 GHz downtilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.3 dBi per antenna.
    - Each 5 GHz radio chain has both a vertically and a horizontally polarized antenna element; AP software automatically and dynamically selects the best set of elements for each data packet transmitted or received.
    - Four integrated vertically polarized 5 GHz downtilt omnidirectional antennas for 4x4 MIMO with peak antenna gain of 5.4 dBi per antenna
    - Four integrated horizontally polarized 5 GHz downtilt omni-directional antennas for 4x4 MIMO with peak antenna gain of 4.2 dBi per antenna
    - Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees.
    - Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the effective per-antenna pattern is 2.6dBi in 2.4 GHz and 2.5 dBi (vertical) or 2.1 dB (horizontal) in 5 GHz.

    OTHER INTERFACES
    • One HPE Smart Rate port (RJ-45, maximum negotiated speed 5Gbps)
    - Auto-sensing link speed (100/1000/2500/5000BASE-T) and MDI/MDX
    - 802.3az Energy Efficient Ethernet (EEE)
    - PoE-PD: 48 Vdc (nominal) 802.3at PoE
    • One 10/100/1000BASE-T Ethernet network interface (RJ-45)
    - Auto-sensing link speed and MDI/MDX
    - 802.3az Energy Efficient Ethernet (EEE)
    - PoE-PD: 48 Vdc (nominal) 802.3at PoE
    • Link aggregation (LACP) support between both network ports for redundancy and increased capacity
    • DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
    • USB 2.0 host interface (Type A connector)
    • Bluetooth Low Energy (BLE) radio
    - Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity
    - Integrated antenna with roughly 30 degrees downtilt
    and peak gain of 5.1 dBi (AP-334/IAP-334) or 2.2 dBi (AP-335/IAP-335)
    • Visual indicators (tri-color LEDs): for System and Radio status
    • Reset button: factory reset (during device power up)
    • Serial console interface (RJ-45, RS232)
    • Kensington security slot

    POWER SOURCES AND CONSUMPTION
    • The AP supports direct DC power and Power over Ethernet (PoE)
    • When both power sources are available, DC power takes priority over PoE
    • Power sources are sold separately
    • Direct DC source: 48Vdc nominal, +/- 5%
    - Interface accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
    • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
    - When using IPM, the AP may enter power-save mode with reduced functionality when powered by a PoE source (see details on Intelligent Power Monitoring in this datasheet)
    - Without IPM the AP will apply some fixed restrictions when using PoE:
    - The USB interface is disabled when using an 802.3at PoE power source
    - The USB interface and second Ethernet port are disabled, and both radios operate in 1x1 mode when using an 802.3af POE power source
    • Maximum (worst-case) power consumption: 25.3W (802.3at PoE), 13.2W (802.3af PoE) or 25W (DC)
    - Excludes power consumed by external USB device (and internal overhead); this could add up to 5.9W (PoE or DC) for a 5W/1A USB device
    • Maximum (worst-case) power consumption in idle mode: 10.9W (PoE or DC)

    MOUNTING
    • The AP ships with two (white) mounting clips to attach to a 9/16-inch or 15/16-inch flat T-bar drop-tile ceiling.
    • Several optional mount kits are available to attach the AP to a variety of surfaces; see the Ordering Information section below for details

    MECHANICAL
    • Dimensions/weight (unit, excluding mount accessories):
    - - 225mm (W) x 224mm (D) x 52mm (H) 8.9” (W) x 8.9” (D) x 2.0” (H)
    - 1150g/41oz
    • Dimensions/weight (shipping):
    - 335mm (W) x 290mm (D) x 76mm (H) 13.2” (W) x 11.4” (D) x 3.0” (H)
    - 1550g/55oz


    Виж още Аксеспойнт/Репитер Безжични HPE
    Виж всички Аксеспойнт/Репитер Безжични в категорията

    Документация

    Технически характеристики

    Тип:  Аксес пойнт
    Монтаж:  За вътрешен монтаж
    Безжична скорост:  1700 Mbps
    Wi-Fi Стандарт:  Wi-Fi 5 (802.11ac)
    Честота:  2.4 & 5 GHz
    Антени:  4 Вътрешни
    dBi на антена/и:  2
    PoE:  In
    Интерфейс:  1x 1000
    Други:  Няма

    Добави Ревю / Въпрос

    Оцени продукта или задай въпрос?

    0.00 от 0 ревюта
    • 5
      0 ревюта
    • 4
      0 ревюта
    • 3
      0 ревюта
    • 2
      0 ревюта
    • 1
      0 ревюта
    • Какво пазаруват другите Какво пазаруват другите
    • Какво пазаруват другите Най-продавани продукти
    • Какво пазаруват другите Промоционални продукти

    HPE Aruba IAP-334 (RW) Instant (JW817A)
    • HPE Aruba IAP-334 (RW) Instant (JW817A)