HP M330
JL063A
Up to 1.3 Gbps on the 802.11ac radio and 450 Mbps on the 2.4 GHz 802.11n radio
Simplified wireless LAN administration with clustering technology
Robust guest access captive portal features
Powered by IEEE 802.3af PoE or included power supply
Centralized wireless LAN management
Simplified access point management
Commonly used configuration parameters enabled on one HPE OfficeConnect M330 Access Point
pass to all members (up to 16 APs) of the cluster, reducing the need to configure each AP individually.
Auto channel planning
APs in a cluster are automatically assigned to a channel that reduces interference between adjacent APs.
Client connection list
Access any member of the cluster to view information about clients connected to any clustered AP.
Secure and easy-to-use Web UI
Quick setup page
Consolidates key settings into one page for simple and rapid configuration for common deployment scenarios.
Browser-base device configuration
HPE OfficeConnect M330 Access Point enables configuration and management through a secure and intuitive Web browser interface.
SNMP v1 and v2c
Facilitates management of the AP as the device can be discovered, monitored and managed from an SNMP management station.
Command-line interface (CLI)
Provides an easy-to -use CLI for configuring the AP via a SSH or Telnet session.
Connectivity
Simultaneous IEEE 802.11ac and IEEE 802.11n radio support
HPE OfficeConnect M330 Dual Radio 802.11ac Access Point Series offers simultaneous 1.3 Gbps IEEE 802.11ac performance concurrently with up to 450 Mbps IEEE 802.11n support. The dual radio design improves coverage and user capacity with 3x3:3 multiple-input multiple-output (MIMO) technology with three spatial streams on each radio so wireless clients connect at maximum performance.
IEEE 802.3af PoE-powered device (PD) option
Simplifies deployment and dramatically reduces installation costs by helping eliminate the time and cost involved in supplying local power at each access point location.
Spanning Tree Protocol (IEEE 802.1D)
Prevents network loops.
IPv6 support
The HPE OfficeConnect M330 Access Point provides native support for IPv6, the newest version of the Internet Protocol, as well as the previous IPv4 standard
Security
Rogue AP detection
Identifies all APs in range; known or trusted access points can be saved, allowing network administrators to identify unauthorized APs.
Secure Sockets Layer (SSL)
Encrypts all HTTP traffic, allowing secure access to the browser-based management interface of the access point.
Management password
Provides security so that only authorized access to the Web browser interface is allowed.
RADIUS-based user authentication
Authenticates a user with a RADIUS server based on user credentials.
RADIUS-based MAC authentication
Authenticates a wireless client with a RADIUS server based on the MAC address of the client; this is useful for clients with minimal or no user interface.
RADIUS-based VLAN assignment
Places wireless client on RADIUS-assigned VLAN.
Closed system
Restricts broadcast of SSID as a security measure to onceal presence of the wireless network.
Wired Equivalent Privacy (WEP) using 64- and 128-bit encryption
Provides backward compatibility for legacy clients.
Choice of IEEE 802.11i, WPA2, or WPA
Locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced
Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic.
Local wireless bridge client traffic filtering
Prevents communication between wireless devices associated with the same SSID.
Secure Shell (SSHv1/v2)
Encrypts all transmitted data for secure, remote CLI access over IP networks.
Виж още Аксеспойнт/Репитер Безжични HPE
Виж всички Аксеспойнт/Репитер Безжични в категорията
JL063A
Up to 1.3 Gbps on the 802.11ac radio and 450 Mbps on the 2.4 GHz 802.11n radio
Simplified wireless LAN administration with clustering technology
Robust guest access captive portal features
Powered by IEEE 802.3af PoE or included power supply
Centralized wireless LAN management
Simplified access point management
Commonly used configuration parameters enabled on one HPE OfficeConnect M330 Access Point
pass to all members (up to 16 APs) of the cluster, reducing the need to configure each AP individually.
Auto channel planning
APs in a cluster are automatically assigned to a channel that reduces interference between adjacent APs.
Client connection list
Access any member of the cluster to view information about clients connected to any clustered AP.
Secure and easy-to-use Web UI
Quick setup page
Consolidates key settings into one page for simple and rapid configuration for common deployment scenarios.
Browser-base device configuration
HPE OfficeConnect M330 Access Point enables configuration and management through a secure and intuitive Web browser interface.
SNMP v1 and v2c
Facilitates management of the AP as the device can be discovered, monitored and managed from an SNMP management station.
Command-line interface (CLI)
Provides an easy-to -use CLI for configuring the AP via a SSH or Telnet session.
Connectivity
Simultaneous IEEE 802.11ac and IEEE 802.11n radio support
HPE OfficeConnect M330 Dual Radio 802.11ac Access Point Series offers simultaneous 1.3 Gbps IEEE 802.11ac performance concurrently with up to 450 Mbps IEEE 802.11n support. The dual radio design improves coverage and user capacity with 3x3:3 multiple-input multiple-output (MIMO) technology with three spatial streams on each radio so wireless clients connect at maximum performance.
IEEE 802.3af PoE-powered device (PD) option
Simplifies deployment and dramatically reduces installation costs by helping eliminate the time and cost involved in supplying local power at each access point location.
Spanning Tree Protocol (IEEE 802.1D)
Prevents network loops.
IPv6 support
The HPE OfficeConnect M330 Access Point provides native support for IPv6, the newest version of the Internet Protocol, as well as the previous IPv4 standard
Security
Rogue AP detection
Identifies all APs in range; known or trusted access points can be saved, allowing network administrators to identify unauthorized APs.
Secure Sockets Layer (SSL)
Encrypts all HTTP traffic, allowing secure access to the browser-based management interface of the access point.
Management password
Provides security so that only authorized access to the Web browser interface is allowed.
RADIUS-based user authentication
Authenticates a user with a RADIUS server based on user credentials.
RADIUS-based MAC authentication
Authenticates a wireless client with a RADIUS server based on the MAC address of the client; this is useful for clients with minimal or no user interface.
RADIUS-based VLAN assignment
Places wireless client on RADIUS-assigned VLAN.
Closed system
Restricts broadcast of SSID as a security measure to onceal presence of the wireless network.
Wired Equivalent Privacy (WEP) using 64- and 128-bit encryption
Provides backward compatibility for legacy clients.
Choice of IEEE 802.11i, WPA2, or WPA
Locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced
Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic.
Local wireless bridge client traffic filtering
Prevents communication between wireless devices associated with the same SSID.
Secure Shell (SSHv1/v2)
Encrypts all transmitted data for secure, remote CLI access over IP networks.
Виж още Аксеспойнт/Репитер Безжични HPE
Виж всички Аксеспойнт/Репитер Безжични в категорията
Технически характеристики
Тип: | Аксес пойнт |
---|---|
Монтаж: | За вътрешен монтаж |
Безжична скорост: | 1300 Mbps |
Wi-Fi Стандарт: | Wi-Fi 5 (802.11ac) |
Честота: | 2.4 & 5 GHz |
Антени: | 6 Вътрешни |
dBi на антена/и: | 5.7 |
PoE: | In |
Интерфейс: | 1x 1000 |
Други: | Няма |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
0.00 от 0 ревюта
- 5
- 4
- 3
- 2
- 1