Cisco WAP361
Cisco WAP361Cisco WAP361

Точка за достъп Cisco WAP361-E-K9, AC/N Dual Radio (2.4 GHz & 5 GHz), 867 Mbps 11ac + 300 Mbps 11n, Wall Plate with PoE, вътрешна антена

id 78013 Код: NTWBCISCOWAP361EK9
  • Модел: WAP361
  • Марка: Cisco
  • Гаранция: 99 месеца
  • Код на продукта: WAP361-E-K9
  • Безжична скорост: 1167 Mbps
  • Wi-Fi Стандарт: Wi-Fi 5 (802.11ac)
  • Честота: 2.4 & 5 GHz
  • Антени: 2 Вътрешни
  • PoE: In
  • Интерфейс: 5x 1000
  • Наличност: Стар продукт
    ОписаниеХарактеристикиРевюта / ВъпросиДокументация
    Cisco WAP361-E-K9

    WAP361 Wireless-AC/N Dual Radio Wall Plate Access Point with PoE (EU Region, Saudi Arabia, Thailand, Vietnam, South Africa)

    High-Performance, Easy-to-Deploy, and Highly Secure Business-Class Wireless-AC Connectivity

    Highlights
    ● Provides cost-effective 802.11ac connectivity with speed up to 1.2 Gbps
    ● Supports 2x2 multiple-input multiple-output (MIMO) technology with two spatial streams for maximum performance on both 2.4- and 5.0-GHz radios
    ● 5 Gigabit Ethernet LAN with Energy Efficient Ethernet
    ● Mounts directly to an electrical or data junction box
    ● A captive portal helps enable highly secure guest access with customized roles and rights
    ● Single Point Setup requires no controller for easy, cost-effective deployment of multiple access points
    ● Works right out of the box with easy installation and a simple web-based configuration and wizard

    Product Overview
    In today’s dynamic business environment, employees are becoming more mobile and collaborative than ever. To stay productive, they need dependable, business-class access to network applications throughout the office. The Cisco® WAP361 Wireless-AC/N Dual Radio Wall Plate Access Points with Power over Ethernet (PoE) provide a simple, cost-effective way to extend highly secure, high-performance mobile networking to your employees and guests, so they can stay connected anywhere in the office regrdless of what mobile devices they use. This flexible solution lets you connect dozens of employees, and can scale to accommodate additional users and changing business needs.

    The WAP361 access point uses a concurrent dual-band radio for improved coverage and user capacity. The 2x2 multiple-input multiple-output (MIMO) technology with two spatial streams allows the access point to run at maximum performance in both 5.0-GHz and 2.4-GHz frequencies. Gigabit Ethernet LAN interfaces with PoE facilitates flexible installation and can reduce cabling and wiring costs. Intelligent quality-of-service (QoS) features let you prioritize bandwidth-sensitive traffic for voice over IP (VoIP) and video applications.

    To provide highly secure guest access to visitors and other users, the WAP361 Wireless-AC/N access point supports a captive portal with multiple authentication options and the ability to configure rights, roles, and bandwidth. A customized guest login page lets you present a welcome message and access details, and reinforces your brand with company logos.

    WAP361 access points are easy to set up and use, with an intuitive wizard-based configuration to get you up and running in minutes. An attractive design with flexible mounting options allows the access points to blend well into any small-business environment.

    To enhance reliability and safeguard sensitive business information, WAP361 access points support both Wi-Fi Protected Access (WPA) Personal and Enterprise, encoding all your wireless transmissions with powerful encryption. In addition, 802.1X RADIUS authentication helps keep unauthorized users out.

    Designed to scale smoothly as your organization grows, the access points feature controller-less Single Point Setup, which simplifies the deployment of multiple access points without additional hardware. With a WAP361 access point, you can extend business-class wireless networking to employees and guests anywhere in the office, with the flexibility to meet new business needs for years to come.

    Standards
    IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af/at, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
    Cabling type Category 5e or better
    Antennas Internal antennas optimized for installation on a wall or ceiling
    Operating system Linux

    Physical Interfaces
    Ports 5 - 10/100/1000 Ethernet, with support for 802.3af/at PoE, power port for AC adapter (not included)
    Power supply 802.3af/at PoE and external 48V/1.25A DC power adapter (not included)
    Buttons Reset button
    Lock slot Slot for Kensington lock
    LEDs One multi-function LED

    Physical dimensions
    (W x D x H)
    6.5 x 4.33 x 1.8 in. (165 x 110 x 45.75 mm)
    Weight 1.06 lbs or 480 g

    Network Capabilities
    VLAN support Yes
    Number of VLANs 1 management VLAN plus 16 VLANs for SSIDs
    802.1X supplicant Yes
    SSID-to-VLAN mapping Yes
    Auto-channel selection Yes
    Spanning Tree Yes
    Load balancing Yes
    IPv6 Yes
    ● IPv6 host support
    ● IPv6 RADIUS, syslog, Network Time Protocol (NTP)
    Layer 2
    802.1Q-based VLANS, 16 active VLANS plus 1 management VLAN

    Security
    WPA, WPA2 Yes, including Enterprise authentication
    Access control Yes, management access control list (ACL) plus MAC ACL
    Secure management HTTPS
    SSID broadcast Yes
    Rogue access point detection Yes
    Mounting and Physical Security
    Multiple mounting options
    Mounting bracket included for easy mounting to junction box
    Physical security lock
    Kensington lock slot
    Quality of Service QoS
    Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), client QoS

    Performance
    Wireless throughput Up to 1.2-Gbps data rate (real-world throughput will vary)
    Recommended user support Up to 128 connective users, 32 active users per radio
    Multiple-Access Point Management
    Single Point Setup Yes
    Number of access points per cluster 8
    Active clients per cluster 240

    Configuration
    Web user interface Built-in web user interface for easy, browser-based configuration (HTTP, HTTPS)

    Management
    Management protocols Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
    Remote management Yes
    Event logging Local, remote syslog, email alerts
    Network diagnostics
    Logging and packet capture
    Web firmware upgrade
    Firmware upgradable through web browser, imported or exported configuration file
    Dynamic Host Configuration Protocol (DHCP) DHCP client
    IPv6 host Yes
    HTTP redirect Yes

    Wireless Frequency
    Dual concurrent radios (2.4 and 5 GHz)
    Radio and modulation type Dual radio, orthogonal frequency division multiplexing (OFDM)
    IEEE 802.11a/n: OFDM (BPSK, QPSK, 16 QAM, 64 QAM)
    IEEE 802.11ac: OFDM (BPSK, QPSK, 16 QAM, 64 QAM, 256 QAM)
    WLAN 802.11n/ac
    2x2 MIMO with 2 spatial streams at 5 GHz
    2x2 MIMO with 2 spatial streams at 2.4 GHz
    20-, 40-, and 80-Mhz channels for 802.11ac
    20- and 40-Mhz for 802.11n
    PHY data rate up to 1.2 Gbps
    802.11 Dynamic Frequency Selection (DFS)
    Data rates supported 802.11a/b/g:
    ● 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2, and 1 Mbps
    802.11n: 6.5 to 300 Mbps
    ● 20-MHz bandwidth: MCS 0-15 for supported data rates
    ● 40-MHz bandwidth: MCS 0-15 for supported data rates
    802.11ac: 6.5 to 867 Mbps
    ● 20-MHz bandwidth: MCS 0-9 for supported data rates
    ● 40-MHz bandwidth: MCS 0-9 for supported data rates
    ● 80-MHz bandwidth: MCS 0-9 for supported data rates

    Internal antennas
    Internal fixed PiFA antenna
    Antenna gain in dBi
    Maximum antenna gain of 4.35 dBi on 2.4 GHz
    Maximum antenna gain of 3.96 dBi on 5 GHz
    Wireless distribution system (WDS) Yes
    Fast roaming Yes
    Multiple SSIDs 16
    Wireless VLAN map Yes
    WLAN security Yes
    Wi-Fi Multimedia (WMM) Yes, with unscheduled automatic power saving
    Access point mode, WDS Bridging, Workgroup Bridge mode

    Environmental
    Power options IEEE 802.3af/at Ethernet switch
    Cisco power injector: SB-PWR-INJ2-xx
    Cisco AC Adapter – SB-PWR-48V-xx (not included)
    PoE peak power: 19.2 W (with PSE load)

    Compliance
    Safety:
    ● UL 60950-1
    ● CAN/CSA-C22.2 No. 60950-1
    ● IEC 60950-1
    ● EN 60950-1
    Radio approvals:
    ● FCC Part 15.247, 15.407
    ● RSS-210 (Canada)
    ● EN 300.328, EN 301.893 (Europe)
    ● AS/NZS 4268.2003 (Australia and New Zealand)
    EMI and susceptibility (Class B):
    ● FCC Part 15.107 and 15.109
    ● ICES-003 (Canada)
    ● EN 301.489-1 and -17 (Europe)
    Operating temperature 0° to 40°C (32° to 104°F)
    Storage temperature -20° to 70°C (-4° to 158°F)
    Operating humidity 10% to 85% noncondensing
    Storage humidity 5% to 90% noncondensing
    System memory
    256 MB RAM
    128 MB flash

    http://www.cisco.com/c/en/us/products/collateral/wireless/small-business-300-series-wireless-access-points/datasheet-c78-736452.html


    Виж още Аксеспойнт/Репитер Безжични Cisco
    Виж всички Аксеспойнт/Репитер Безжични в категорията

    Документация

    Технически характеристики

    Тип:  Аксес пойнт
    Монтаж:  За вътрешен монтаж
    Безжична скорост:  1167 Mbps
    Wi-Fi Стандарт:  Wi-Fi 5 (802.11ac)
    Честота:  2.4 & 5 GHz
    Антени:  2 Вътрешни
    dBi на антена/и:  4
    PoE:  In
    Интерфейс:  5x 1000
    Други:  Няма

    Добави Ревю / Въпрос

    Оцени продукта или задай въпрос?

    0.00 от 0 ревюта
    • 5
      0 ревюта
    • 4
      0 ревюта
    • 3
      0 ревюта
    • 2
      0 ревюта
    • 1
      0 ревюта
    • Какво пазаруват другите Какво пазаруват другите
    • Какво пазаруват другите Най-продавани продукти
    • Какво пазаруват другите Промоционални продукти

    Cisco WAP361
    • Cisco WAP361
    • Cisco WAP361