Cisco Aironet 1815i
AIR-AP1815I-E-K9
Ideal for small and medium-sized networks, the Cisco® Aironet® 1815i Access Point brings a full slate of Cisco high-performance functionality to the enterprise environment.
Features
MU-MIMO: Multiuser (MU) multiple-input multiple-output (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2–capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as single-user MIMO (SU‑MIMO). 802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.
Cisco Mobility Express solution: Flexible deployment through the Mobility Express solution is ideal for small to medium-sized deployments. Easy setup allows the 1815i to be deployed on networks without a physical controller.
Integrated Bluetooth 4.1: Integrated Bluetooth low-energy (BLE) 4.1 radio for location and asset tracking (future availability).
Increased wireless performance:
The 1815i access point supports the latest 802.11ac Wave 2 standard for higher performance, greater access, and higher-density networks. With simultaneous dual radios and dual band with 802.11ac Wave 2 MU-MIMO functionality, this access point can handle the increasing number of high-bandwidth devices that will soon become a common part of the network.
Wired access: The 1815i allows wired access via a single RJ-45 10/100/1000 auto-detection port. It supports full operation modes using PoE 802.3af power.
Mounting: These sleek access points with a small form factor are designed with flexible mounting options in mind. You can mount them directly on the ceiling or a wall. They are also easy to install.
System:
● 1 GB DRAM
● 256 MB flash
● 710 MHz quad core
Authentication and security:
● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization, and accounting (AAA)
● 802.11r
● 802.11i
Software:
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
● Cisco Mobility Express (future availability)
Maximum clients:
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac:
● 2x2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC)
● 20-, 40- and 80-MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic shift diversity (CSD) support
Ethernet ports:
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability):
● Integrated Bluetooth 4.1 (including BLE) radio
● Maximum transmit power: 4 dBm
● Antenna gain: 2 dBi
Data rates supported:
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Integrated antennas:
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 4 dBi
Interfaces:
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
Indicators:
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Power draw:
● 8.3W (maximum, on PoE)
150.8 x 150.8 x 33 mm
400 g
Виж още Аксеспойнт/Репитер Безжични Cisco
Виж всички Аксеспойнт/Репитер Безжични в категорията
AIR-AP1815I-E-K9
Ideal for small and medium-sized networks, the Cisco® Aironet® 1815i Access Point brings a full slate of Cisco high-performance functionality to the enterprise environment.
Features
MU-MIMO: Multiuser (MU) multiple-input multiple-output (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2–capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as single-user MIMO (SU‑MIMO). 802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.
Cisco Mobility Express solution: Flexible deployment through the Mobility Express solution is ideal for small to medium-sized deployments. Easy setup allows the 1815i to be deployed on networks without a physical controller.
Integrated Bluetooth 4.1: Integrated Bluetooth low-energy (BLE) 4.1 radio for location and asset tracking (future availability).
Increased wireless performance:
The 1815i access point supports the latest 802.11ac Wave 2 standard for higher performance, greater access, and higher-density networks. With simultaneous dual radios and dual band with 802.11ac Wave 2 MU-MIMO functionality, this access point can handle the increasing number of high-bandwidth devices that will soon become a common part of the network.
Wired access: The 1815i allows wired access via a single RJ-45 10/100/1000 auto-detection port. It supports full operation modes using PoE 802.3af power.
Mounting: These sleek access points with a small form factor are designed with flexible mounting options in mind. You can mount them directly on the ceiling or a wall. They are also easy to install.
System:
● 1 GB DRAM
● 256 MB flash
● 710 MHz quad core
Authentication and security:
● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization, and accounting (AAA)
● 802.11r
● 802.11i
Software:
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
● Cisco Mobility Express (future availability)
Maximum clients:
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac:
● 2x2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC)
● 20-, 40- and 80-MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic shift diversity (CSD) support
Ethernet ports:
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future availability):
● Integrated Bluetooth 4.1 (including BLE) radio
● Maximum transmit power: 4 dBm
● Antenna gain: 2 dBi
Data rates supported:
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
Integrated antennas:
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 4 dBi
Interfaces:
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
Indicators:
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Power draw:
● 8.3W (maximum, on PoE)
150.8 x 150.8 x 33 mm
400 g
Виж още Аксеспойнт/Репитер Безжични Cisco
Виж всички Аксеспойнт/Репитер Безжични в категорията
Документация
Технически характеристики
Тип: | Аксес пойнт |
---|---|
Монтаж: | За вътрешен монтаж |
Безжична скорост: | 1000 Mbps |
Wi-Fi Стандарт: | Wi-Fi 5 (802.11ac) |
Честота: | 2.4 & 5 GHz |
Антени: | 2 Вътрешни |
dBi на антена/и: | 4 |
PoE: | In |
Интерфейс: | 1x 1000 |
Други: | Bluetooth |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
0.00 от 0 ревюта
- 5
- 4
- 3
- 2
- 1
Свързани продукти
-
Точка за достъп TP-Link EAP245(5-pack), 5GHz (1300Mbps) & 2.4GHz (450Mbps), 1x Gigabit Ethernet port (10/100/1000 Mbps), 5бр.
985.92лв
-
Точка за достъп Ubiquiti UniFi UAP-nanoHD, 2.4 GHz/5 GHz, Wireless AC, 1x 10/100/1000, 3 броя
1034.82лв
-
Точка за достъп Ubiquiti AF-5XHD, 5GHz(1000Mbps), 2x 10/100/1000, Bluetooth, до 100+ км, водоустойчив IP673
899.39лв