Netgear GS408EPP
The NETGEAR ProSAFE® Easy-Mount Switch allows you to put more PoE/PoE+ ports Virtually Anywhere™ with its unique mounting system.
The Easy-Mount Switch family comes with a full set of software features such as traffic prioritization, VLANs, QoS and PoE power allocation.
Moreover the Easy-Mount switches comes with Energy Efficient Ethernet for maximum power savings.
PoE/PoE+ Support
Power-Over-Ethernet (PoE) option available for powering IP Security Cameras, VOIP phones, wireless access points, and other PD-powered devices.
With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3af, 802.3at) providing up to 30W per port, and a power budget of 124W, provide power and connectivity across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT devices.
Hardware
8-port Gigabit Ethernet Ports
8 PoE/PoE+ ports (802.3af, 802.3at) with 124W PoE/PoE+ Budget
Virtually AnywhereTM Easy-Mount system allows for:
1. On a Wall.
2. Under a Tabletop/Desktop.
3. On a rectangular or round pole.
4. Up in the ceiling.
5. In a standard 19-inch rack
Multi-directional power cable can be routed outwards or downwards
Internal power supply (simple power cord from switch to outlet)
LED lights can be turned off for non-distracting placement next to a TV
Performance
192KB packet buffer memory (dynamically shared across only used ports)
16 Gbps non-blocking fabric (bandwidth)
4 Priority queues
Weighted Round Robin (WRR) priority queuing
4K Media Access Control (MAC) addresses with 48-bit MAC address
128 Multicast groups
64 VLANs
Jumbo frames up to 9K packet size supported
VLANs
IEEE 802.1Q VLAN tagging
Port-based VLANs (physical)
Multicast
IGMP snooping, v1, v2 and v3
Blocking of unknown multicast traffic
Link Aggregation
IEEE 802.3ad - Static LAGs
2 LAGs with max 4 members in each LAG
Quality of Service (QoS)
Port-based rate limiting (ingress and egress)
Port-based QoS
IEEE 802.1p COS
IPv4 DSCP
IPv4 ToS
Weighted Round Robin (WRR)
Network Security
Broadcast, multicast, unknown unicast storm control
DoS attacks prevention
Reliability, Performance and Troubleshooting
Port mirroring both on ingress and egress traffic
Jumbo frame support
Broadcast storm control
Cable diagnostics
Loop detection
Energy Efficient Ethernet (IEEE 802.3az) compliant
Broadcast, multicast, unknown unicast storm control
Management
Password management
Web browser-based graphical user interface (GUI) for advanced configuration and management
ProSAFE Plus Configuration Utility (PCU) for multi-switch management (requires Windows PC)
Firmware upgrade via HTTP (Web GUI) or TFTP (Plus Utility)
Config file transfers (backup, restore) using web browser-based management GUI or Plus Utility
Port mirroring; many-to-one port mirroring
Energy Efficient Ethernet (EEE) IEEE 802.3az (deactivated by default)
Short cable power reduction
Auto power-down
Broadcast, multicast, unknown unicast storm control
DHCP client
Model Description
8-port Gigabit Web Managed Easy-Mount Switch w/8-port PoE/PoE+
Gigabit ports
8
PoE/PoE+ Ports / PoE Budget
8 PoE/PoE+, 124W PoE Budget
Max MAC entries
4K
Buffer size
192 KB
Link Aggregation / Port Trunking
Manual Static LAG
Number of LAGs & Number of Members
2 LAGS with max 4 members in each LAG
Supported Multicast Groups
128
Auto Denial-of-Service Prevention
Yes
Port Mirroring Max Number of Source Ports Allowed (Many to 1)
1
Jumbo Frame Support
Up to 9K packets
Max Power Consumption (Watts)
5.8W (non-PoE) 148W (PoE)
Acoustic Noise Level @ 25° C (dBA)
26.9 dBA
VLAN (# supported)
64
Number of priority queues
4
Power supply
Internal: 100-240VAC, 50-60Hz, 2A max (power cord localized to country of sale)
Fan(s)
Active Fan
Operating Temperature
0° to 50° C
MTBF (hours)
2,715,369 hours
Electromagnetic compliance (A or B)
A
Dimensions (W x D x H)
380 x 100 x 43.2 mm (15 x 3.9 x 1.7 in)
Weight
1.6 kg(3.53 lb)
Повече информация:
Виж още Суич Netgear
Виж всички Суич в категорията
The NETGEAR ProSAFE® Easy-Mount Switch allows you to put more PoE/PoE+ ports Virtually Anywhere™ with its unique mounting system.
The Easy-Mount Switch family comes with a full set of software features such as traffic prioritization, VLANs, QoS and PoE power allocation.
Moreover the Easy-Mount switches comes with Energy Efficient Ethernet for maximum power savings.
PoE/PoE+ Support
Power-Over-Ethernet (PoE) option available for powering IP Security Cameras, VOIP phones, wireless access points, and other PD-powered devices.
With eight (8) PoE/PoE+ Gigabit Ethernet ports (802.3af, 802.3at) providing up to 30W per port, and a power budget of 124W, provide power and connectivity across one wire to power-hungry PoE devices like 802.11ac Wave 2 Access Points, Pan/Tilt/Zoom/HD Security Cameras, security door locks, and other IoT devices.
Hardware
8-port Gigabit Ethernet Ports
8 PoE/PoE+ ports (802.3af, 802.3at) with 124W PoE/PoE+ Budget
Virtually AnywhereTM Easy-Mount system allows for:
1. On a Wall.
2. Under a Tabletop/Desktop.
3. On a rectangular or round pole.
4. Up in the ceiling.
5. In a standard 19-inch rack
Multi-directional power cable can be routed outwards or downwards
Internal power supply (simple power cord from switch to outlet)
LED lights can be turned off for non-distracting placement next to a TV
Performance
192KB packet buffer memory (dynamically shared across only used ports)
16 Gbps non-blocking fabric (bandwidth)
4 Priority queues
Weighted Round Robin (WRR) priority queuing
4K Media Access Control (MAC) addresses with 48-bit MAC address
128 Multicast groups
64 VLANs
Jumbo frames up to 9K packet size supported
VLANs
IEEE 802.1Q VLAN tagging
Port-based VLANs (physical)
Multicast
IGMP snooping, v1, v2 and v3
Blocking of unknown multicast traffic
Link Aggregation
IEEE 802.3ad - Static LAGs
2 LAGs with max 4 members in each LAG
Quality of Service (QoS)
Port-based rate limiting (ingress and egress)
Port-based QoS
IEEE 802.1p COS
IPv4 DSCP
IPv4 ToS
Weighted Round Robin (WRR)
Network Security
Broadcast, multicast, unknown unicast storm control
DoS attacks prevention
Reliability, Performance and Troubleshooting
Port mirroring both on ingress and egress traffic
Jumbo frame support
Broadcast storm control
Cable diagnostics
Loop detection
Energy Efficient Ethernet (IEEE 802.3az) compliant
Broadcast, multicast, unknown unicast storm control
Management
Password management
Web browser-based graphical user interface (GUI) for advanced configuration and management
ProSAFE Plus Configuration Utility (PCU) for multi-switch management (requires Windows PC)
Firmware upgrade via HTTP (Web GUI) or TFTP (Plus Utility)
Config file transfers (backup, restore) using web browser-based management GUI or Plus Utility
Port mirroring; many-to-one port mirroring
Energy Efficient Ethernet (EEE) IEEE 802.3az (deactivated by default)
Short cable power reduction
Auto power-down
Broadcast, multicast, unknown unicast storm control
DHCP client
Model Description
8-port Gigabit Web Managed Easy-Mount Switch w/8-port PoE/PoE+
Gigabit ports
8
PoE/PoE+ Ports / PoE Budget
8 PoE/PoE+, 124W PoE Budget
Max MAC entries
4K
Buffer size
192 KB
Link Aggregation / Port Trunking
Manual Static LAG
Number of LAGs & Number of Members
2 LAGS with max 4 members in each LAG
Supported Multicast Groups
128
Auto Denial-of-Service Prevention
Yes
Port Mirroring Max Number of Source Ports Allowed (Many to 1)
1
Jumbo Frame Support
Up to 9K packets
Max Power Consumption (Watts)
5.8W (non-PoE) 148W (PoE)
Acoustic Noise Level @ 25° C (dBA)
26.9 dBA
VLAN (# supported)
64
Number of priority queues
4
Power supply
Internal: 100-240VAC, 50-60Hz, 2A max (power cord localized to country of sale)
Fan(s)
Active Fan
Operating Temperature
0° to 50° C
MTBF (hours)
2,715,369 hours
Electromagnetic compliance (A or B)
A
Dimensions (W x D x H)
380 x 100 x 43.2 mm (15 x 3.9 x 1.7 in)
Weight
1.6 kg(3.53 lb)
Повече информация:
Виж още Суич Netgear
Виж всички Суич в категорията
Документация
Технически характеристики
Брой портове: | 8 |
---|---|
Максимална скорост: | 1 Mbps |
Добави Ревю / Въпрос
Оцени продукта или задай въпрос?
0.00 от 0 ревюта
- 5
- 4
- 3
- 2
- 1