Памет 8GB DDR4 3200MHz, UDIMM, Kingston HyperX Fury HX432C18FB2/8, 1.2V

Kingston HyperX Fury HX432C18FB2/8

HyperX HX432C18FB2/8 is a 1G x 64-bit (8GB) DDR4-3200 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3200 at a low latency timing of 18-21-21 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:

JEDEC/XMP TIMING PARAMETERS
• JEDEC/PnP: DDR4-3200 CL18-21-21 @1.2V
•XMP Profile #1: DDR4-3200 CL18-21-21 @1.2V
•XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V

CL(IDD) : 18 cycles
Row Cycle Time (tRCmin) : 45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin) : 350ns(min.)
Row Active Time (tRASmin) : 24.375ns(min.)
Maximum Operating Power : TBD W*
UL Rating : 94 V - 0
Operating Temperature : 0 C to +85 C
Storage Temperature : 55 C to +100 C

• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.340” (34.04mm), w/heatsink


Виж още Настолни компютри Памети Kingston
Виж всички Настолни компютри Памети в категорията