Памет 16GB DDR4 3466MHz, HyperX Fury HX434C19FB/16, 1.2V

HyperX Fury 16GB 2G x 64-Bit DDR4-3466 CL19 288-Pin DIMM
HX434C19FB/16

HyperX HX434C19FB/16 is a 2G x 64-bit (16GB) DDR4-3466 CL19
SDRAM (Synchronous DRAM) 2Rx8, memory module, based on
sixteen 1G x 8-bit FBGA components per module. Each module
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.
Each module has been tested to run at DDR4-3466 at a low latency
timing of 19-23-23 at 1.2V. Additional timing parameters are
shown in the Plug-N-Play (PnP) Timing Parameters section
below. The JEDEC standard electrical and mechanical
specifications are as follows:

JEDEC/XMP TIMING PARAMETERS
JEDEC/PnP: DDR4-3466 CL19-23-23 @1.2V
XMP Profile #1: DDR4-3466 CL19-23-23 @1.2V
XMP Profile #2: DDR4-2933 CL17-19-19 @1.2V

Features

Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.340” (34.04mm), w/heatsink

SPECIFICATIONS

CL(IDD) 19 cycles
Row Cycle Time (tRCmin) 45.75ns(min.)
Refresh to Active/Refresh
Command Time (tRFCmin) 350ns(min.)
Row Active Time (tRASmin) 24.234ns(min.)
Maximum Operating Power TBD W
UL Rating 94 V - 0
Operating Temperature 0°C to +85°C
Storage Temperature -55°C to +100°C



Виж още Настолни компютри Памети HyperX
Виж всички Настолни компютри Памети в категорията